Fordmods Logo

stalling under brakes? 

 

Page 1 of 2 [ 16 posts ] Go to page 1, 2  Next

 
 Post subject: stalling under brakes?
Posted: Thu Oct 27, 2005 11:43 am 
Technical Contributor
Offline
User avatar

Age: 40

Posts: 5855

Joined: 5th Nov 2004

Gallery: 8 images

Ride: '95 EF's

Location: Leederville
WA, Australia

hey all

noticed something irritating recently - as i pull up to a set of lights/roundabout etc, the car, just as its about to stop, feels like its about to stall :? it hasn't at all, but its pissing me off, and was just wondering what people might think it is?

i'm thinking of resetting the ECU, resetting the base idle, and cleaning the ISC - any other thoughts?

cheers

 

_________________

R.I.P. Scotty

Top
 Profile  
 
 
Posted: Thu Oct 27, 2005 11:56 am 
Getting Side Ways
Offline
User avatar

Age: 59

Posts: 4370

Joined: 5th Nov 2004

Ride: BA Fairlane Ghia

Location: Karratha
WA, Australia

Hey Bob, is this while you are turning steering wheel, power steering switch maybe? something isnt kicking in when it should.
Top
 Profile  
 
 
Posted: Thu Oct 27, 2005 12:02 pm 
Getting Side Ways
Offline
User avatar

Age: 51

Posts: 10128

Joined: 5th Nov 2004

Gallery: 4 images

Ride: EF Gli Ghia, XP Fairmont

Location: Perth
WA, Australia

could be something to do with your vacuum tank - which generally purges as you use the brakes...

 

_________________

Owning 1 of 67612 EF GLi Sedans made
FACT: "Chuck Norris owns the greatest Poker Face of all-time. It helped him win the 1983 World Series of Poker despite him holding just a Joker, a Get out of Jail Free Monopoly card, a 2 of clubs, 7 of spades and a green #4 card from the game Uno."

Top
 Profile  
 
 
Posted: Thu Oct 27, 2005 12:05 pm 
Technical Contributor
Offline
User avatar

Age: 40

Posts: 5855

Joined: 5th Nov 2004

Gallery: 8 images

Ride: '95 EF's

Location: Leederville
WA, Australia

nope its irrelevant if i'm turning or stopping in a straight line. as for the vacuum tank - where is it? :?

 

_________________

R.I.P. Scotty

Top
 Profile  
 
 
Posted: Thu Oct 27, 2005 12:18 pm 
Getting Side Ways
Offline
User avatar

Age: 51

Posts: 10128

Joined: 5th Nov 2004

Gallery: 4 images

Ride: EF Gli Ghia, XP Fairmont

Location: Perth
WA, Australia

drivers side front guard - just in front of the door.

 

_________________

Owning 1 of 67612 EF GLi Sedans made
FACT: "Chuck Norris owns the greatest Poker Face of all-time. It helped him win the 1983 World Series of Poker despite him holding just a Joker, a Get out of Jail Free Monopoly card, a 2 of clubs, 7 of spades and a green #4 card from the game Uno."

Top
 Profile  
 
 
Posted: Thu Oct 27, 2005 12:59 pm 
Parts Gopher
Offline

Age: 41

Posts: 62

Joined: 6th Oct 2005

Ride: ED Hwy rider

Location: Way out SE Melb
VIC, Australia

mine used to do that when it was auto, every time i just reset the ecu, came good after that for a few months, not sure what changes to make it start doin that.

 

_________________

5spd conversion, extac 2 1/2 mandrell bend, 2.92lsd, kings lowered.

Top
 Profile  
 
 
Posted: Fri Oct 28, 2005 10:51 am 
Getting Side Ways
Offline
User avatar

Age: 61

Posts: 4102

Joined: 18th Nov 2004

Gallery: 10 images

Ride: PX2 Ranger 4x4 XLT Dual CAB

Location: Carrum Downs
VIC, Australia

Happy wrote:
could be something to do with your vacuum tank - which generally purges as you use the brakes...


Can you please explain this?

How is it purging and from where?

Why would it need to be purged?

 

_________________

Image
She's meanness put to music and the b**ch is born to run!
Like the sign says, "speed's just a question of money. How fast can you go?"

Top
 Profile  
 
 
Posted: Fri Oct 28, 2005 1:58 pm 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 5051

Joined: 5th Nov 2004

Ride: Kia Rio - 1.4L Auto

Power: 238 rwkw

Location: Westside
VIC, Australia

Happy wrote:
could be something to do with your vacuum tank - which generally purges as you use the brakes...


Cant see how that would happen. The brake booster is much much larger than the tank. Plus it has a one way valve in the engine bay to stop the tank being emptied.

I would guess the base idle maybe too low, or the isc is slow to react. If I stamp on my brakes hard when i get to a stop the revs dip low. But the isc is working hard to lift the revs back up. But it never stalls or feels like it will stall.
Top
 Profile  
 
 
Posted: Fri Oct 28, 2005 2:05 pm 
Technical Contributor
Offline
User avatar

Age: 40

Posts: 5855

Joined: 5th Nov 2004

Gallery: 8 images

Ride: '95 EF's

Location: Leederville
WA, Australia

hmmm - so an ISC clean & base idle reset looks on the cards for this weekend then! :?

 

_________________

R.I.P. Scotty

Top
 Profile  
 
 
Posted: Fri Oct 28, 2005 9:35 pm 
Getting Side Ways
Offline
User avatar

Age: 61

Posts: 4102

Joined: 18th Nov 2004

Gallery: 10 images

Ride: PX2 Ranger 4x4 XLT Dual CAB

Location: Carrum Downs
VIC, Australia

arm79 wrote:
Happy wrote:
could be something to do with your vacuum tank - which generally purges as you use the brakes...


Cant see how that would happen. The brake booster is much much larger than the tank. Plus it has a one way valve in the engine bay to stop the tank being emptied.

I would guess the base idle maybe too low, or the isc is slow to react. If I stamp on my brakes hard when i get to a stop the revs dip low. But the isc is working hard to lift the revs back up. But it never stalls or feels like it will stall.


Thats why I asked the question, it didn't seem to make much sense to me either.
My understanding, the vacuum tank is only to maintain vacuum to the heater controls

 

_________________

Image
She's meanness put to music and the b**ch is born to run!
Like the sign says, "speed's just a question of money. How fast can you go?"

Top
 Profile  
 
 
Posted: Fri Oct 28, 2005 9:39 pm 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 5051

Joined: 5th Nov 2004

Ride: Kia Rio - 1.4L Auto

Power: 238 rwkw

Location: Westside
VIC, Australia

madmax wrote:
arm79 wrote:
Happy wrote:
could be something to do with your vacuum tank - which generally purges as you use the brakes...


Cant see how that would happen. The brake booster is much much larger than the tank. Plus it has a one way valve in the engine bay to stop the tank being emptied.

I would guess the base idle maybe too low, or the isc is slow to react. If I stamp on my brakes hard when i get to a stop the revs dip low. But the isc is working hard to lift the revs back up. But it never stalls or feels like it will stall.


Thats why I asked the question, it didn't seem to make much sense to me either.
My understanding, the vacuum tank is only to maintain vacuum to the heater controls



Eggzarcary... To maintain heater controls at WOT and the engine is not generating vaccum.
Top
 Profile  
 
 
Posted: Fri Oct 28, 2005 10:49 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 1680

Joined: 5th Nov 2004

Gallery: 1 images

Ride: 220kw 1600 Datto

Location: Scaaabz
WA, Australia

itll be isc

 

_________________

Image

Top
 Profile  
 
 
Posted: Sat Oct 29, 2005 2:16 am 
Technical Contributor
Offline
User avatar

Age: 40

Posts: 5855

Joined: 5th Nov 2004

Gallery: 8 images

Ride: '95 EF's

Location: Leederville
WA, Australia

SVO XR6 wrote:
itll be isc


you're gay :?

 

_________________

R.I.P. Scotty

Top
 Profile  
 
 
Posted: Sat Oct 29, 2005 2:53 am 
Getting Side Ways
Offline

Age: 38

Posts: 3894

Joined: 15th Nov 2004

Gallery: 24 images

Ride: BF MKII V8 Fairmont Ghia

Location: Perth
WA, Australia

uglybob wrote:
SVO XR6 wrote:
itll be isc


you're gay :?


fuken come back on the centry there! ah that line never gets old..

 

_________________

2007 Steel BF Ghia MKII V8 - 19" GTP's + Superlows

Top
 Profile  
 
 
Posted: Sat Oct 29, 2005 12:32 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 1680

Joined: 5th Nov 2004

Gallery: 1 images

Ride: 220kw 1600 Datto

Location: Scaaabz
WA, Australia

just clean it you fat C***

 

_________________

Image

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 2  [ 16 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: Google [Bot] and 54 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sun Nov 24, 2024 8:52 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names