|
jughead302 |
|
||
Age: 34 Posts: 326 Joined: 3rd Nov 2009 Ride: AUII XR8 Pursuit & EF XR6 Location: Albion Park |
Ive tried everything to get my ute going and it just dont want to go. Ive checked all the plugs, leads, dizzy and timing and its all in good order. But it doesnt get fuel into the cylinders to fire, if you spray Aerostart down it, it sort of fires, which makes sense but on it own it hasnt got nothing.
All help will be good as Ive just got no more ideas. And as its on been partially rebuilt because of the aux shaft if this one dont go then its out with one and a new one in its place.
_________________ - 1994 EF XR6, Auto, EL XR wheels. Clean and close to original ( Missus' Kiddie Chariot ) |
||
Top | |
fatnsticky |
|
|||
|
did it run b4 u pulled it apart, why was it pulled apart, what was pulled apart. need more info mate
_________________ If u can't fix it with a hammer, it's an electrical problem |
|||
Top | |
fatnsticky |
|
|||
|
"It doesn't get fuel into the cyl to fire" - haven't got the fuel supply/rail line and the fuel reg/return line crossed over??
_________________ If u can't fix it with a hammer, it's an electrical problem |
|||
Top | |
fatnsticky |
|
|||
|
"It doesn't get fuel into the cyl to fire" - haven't got the fuel supply/rail line and the fuel reg/return line crossed over??
_________________ If u can't fix it with a hammer, it's an electrical problem |
|||
Top | |
jughead302 |
|
||
Age: 34 Posts: 326 Joined: 3rd Nov 2009 Ride: AUII XR8 Pursuit & EF XR6 Location: Albion Park |
Auxilary shaft spun the teeth off. It was running good until this. I pulled the entire front off and replaced the shaft. I didnt touch nothing fuel wise so Im not sure what the issue could be.
Is there suppose to be vacuum in the inlet manifold to open up the fuel regulator?? Because that seems to be the issue, theres fuel all the way up the line to the reg then thats it.
_________________ - 1994 EF XR6, Auto, EL XR wheels. Clean and close to original ( Missus' Kiddie Chariot ) |
||
Top | |
67RCE |
|
||
|
TFI Module. try replacing that.
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
Top | |
jughead302 |
|
||
Age: 34 Posts: 326 Joined: 3rd Nov 2009 Ride: AUII XR8 Pursuit & EF XR6 Location: Albion Park |
Alright will do that one in the morning. A little more information on the TFI module if possible, as in whats it do and control. Sorry only new to the Fords so stupid ?s might c*m up . Lol.
_________________ - 1994 EF XR6, Auto, EL XR wheels. Clean and close to original ( Missus' Kiddie Chariot ) |
||
Top | |
67RCE |
|
||
|
jughead302 wrote: Alright will do that one in the morning. A little more information on the TFI module if possible, as in whats it do and control. Sorry only new to the Fords so stupid ?s might c*m up . Lol. Sends the ECU Cylinder info so it knows what injectors to fire, and controls ignition.
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
Top | |
sexyr6 |
|
|||
|
jughead302 wrote: Alright will do that one in the morning. A little more information on the TFI module if possible, as in whats it do and control. Sorry only new to the Fords so stupid ?s might c*m up . Lol. TFI is on the side of the dizzy
_________________
|
|||
Top | |
jughead302 |
|
||
Age: 34 Posts: 326 Joined: 3rd Nov 2009 Ride: AUII XR8 Pursuit & EF XR6 Location: Albion Park |
Thanks. Will report back tomorrow with hope to be good news.
_________________ - 1994 EF XR6, Auto, EL XR wheels. Clean and close to original ( Missus' Kiddie Chariot ) |
||
Top | |
sexyr6 |
|
|||
|
is the fuel pump working?
_________________
|
|||
Top | |
fatnsticky |
|
|||
|
jughead302 wrote: Auxilary shaft spun the teeth off. It was running good until this. I pulled the entire front off and replaced the shaft. I didnt touch nothing fuel wise so Im not sure what the issue could be. Had the shaft seized? Cam timing good? Check compression 2 c if bent valves Is there suppose to be vacuum in the inlet manifold to open up the fuel regulator?? Because that seems to be the issue, theres fuel all the way up the line to the reg then thats it. The vac line goes from the fuel reg to the xmas tree on the back of the inlet manifold
_________________ If u can't fix it with a hammer, it's an electrical problem |
|||
Top | |
jughead302 |
|
||
Age: 34 Posts: 326 Joined: 3rd Nov 2009 Ride: AUII XR8 Pursuit & EF XR6 Location: Albion Park |
Fuel Pump works. Ive just replaced the TFI module with a brand new unit and still no hint of wanting to go! Ive just put a brand new coil in aswell so it must be the wiring thats got an issue. Is there any chance that the ECU has packed it in??
_________________ - 1994 EF XR6, Auto, EL XR wheels. Clean and close to original ( Missus' Kiddie Chariot ) |
||
Top | |
sexyr6 |
|
|||
|
have you checked for fuel pressure using a guage? the fuel reg may have s**t its self, not an uncommon thing..
_________________
|
|||
Top | |
jughead302 |
|
||
Age: 34 Posts: 326 Joined: 3rd Nov 2009 Ride: AUII XR8 Pursuit & EF XR6 Location: Albion Park |
Alright made some progress! The timing is not the issue, dizzy, coil or the rest. The car will run well with Instant Start just sits there and idles and does its thing. Ive removed the fuel reg and it seems fine, the fuel rail is full of fuel but the injectors are not letting the fuel out.
Is this a sign of a f**ked fuel reg or what? Whats the issue? Im so close but so far. Lol.
_________________ - 1994 EF XR6, Auto, EL XR wheels. Clean and close to original ( Missus' Kiddie Chariot ) |
||
Top | |
Who is online |
---|
Users browsing this forum: Google Adsense [Bot] and 63 guests |