Fordmods Logo

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

Taking off Fan - ED 

 

Page 1 of 1 [ 9 posts ] 

Post New Topic Post Reply  Previous topic Next topic
 
ED94field
 Post subject: Taking off Fan - ED
Posted: Sun Jun 21, 2009 5:38 pm 
Fordmods Newbie
Offline

Age: 36

Posts: 3

Joined: 21st Jun 2009

Ride: Falcon ED

Location: Sydney
NSW, Australia
Hi
I am currently in the process of replacing my water pump for my falcon ED, but i am having troubles in removing that huge bolt that connects the fan to the water pump. Any suggestions? or links? Been trying for at least a couple of hours with no luck.

thanks :x
Top
 Profile  
 
 
Shortshift
 Post subject: Re: Taking off Fan - ED
Posted: Sun Jun 21, 2009 5:44 pm 
Getting Side Ways
Offline
User avatar

Age: 61

Posts: 869

Joined: 12th Aug 2007

Gallery: 22 images

Ride: AU2 XR8 ute & 91 EA bitsa

Location: Melbourne
VIC, Australia
Have you tried undoing the nut in a clockwise direction?

 

_________________

AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection
Top
 Profile  
 
 
TROYMAN
 Post subject: Re: Taking off Fan - ED
Posted: Sun Jun 21, 2009 5:46 pm 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia
its reverse thread so try turn it clockwise like shortshift suggested...
Top
 Profile  
 
 
ED94field
 Post subject: Re: Taking off Fan - ED
Posted: Sun Jun 21, 2009 7:32 pm 
Fordmods Newbie
Offline

Age: 36

Posts: 3

Joined: 21st Jun 2009

Ride: Falcon ED

Location: Sydney
NSW, Australia
thanks but i think im in need of larger open ended or a non slip spanner. The largest ive got is a 300mm but its too thick and slips. What is the correct size? I think I heard it was 32mm?
Top
 Profile  
 
 
jonathon
 Post subject: Re: Taking off Fan - ED
Posted: Sun Jun 21, 2009 8:48 pm 
SA Cruise Moderator
Offline
User avatar

Age: 37

Posts: 1870

Joined: 14th Apr 2006

Ride: 1993 EBll xr6, 2003 ba xt

Power: 150 rwkw

Location: Whyalla
SA, Australia
yep 32mm spanner i use an open end spanner and some thing to wedge between the water pump pulley like a screwdriver

 

_________________

Owning 1 of 84,847 ebII.
2x clarion subs 1200w, 1x clarion amp 400w, pioneer headunit, 16x8 roh reflex.
Clear side, front indicators, White dials, trip computer, boot spoiler, K & N air filter.
35% tint, paint code (z) stark white, 3" crome nudge bar, Xh snorkle
Top
 Profile  
 
 
stonemonkey
 Post subject: Re: Taking off Fan - ED
Posted: Sun Jun 21, 2009 9:30 pm 
Fordmods Newbie
Offline

Posts: 7

Joined: 22nd Jun 2007

Location: Perth
WA, Australia
I had to heat mine up with a little butane torch, worked a treat. I replaced my fan with thermos so I'm not sure if the heat damaged the clutch assembly, I doubt it but if you are careful.
Top
 Profile  
 
 
gutza
 Post subject: Re: Taking off Fan - ED
Posted: Mon Jun 22, 2009 8:54 am 
Stock as a Rock
Offline

Age: 68

Posts: 157

Joined: 2nd Nov 2005

Ride: EA Fairmont

Location: Canberra
ACT, Australia
Hi There

If you can't borrow the correct sized spanner.......
I got a 32mm Supa-Works Gold from Supercheap Auto for under $20.
Other places / brands were heading towards the $50 mark.
Worked fine getting the fan off and on my EA.

Good Luck
Top
 Profile  
 
 
ED94field
 Post subject: Re: Taking off Fan - ED
Posted: Mon Jun 22, 2009 7:00 pm 
Fordmods Newbie
Offline

Age: 36

Posts: 3

Joined: 21st Jun 2009

Ride: Falcon ED

Location: Sydney
NSW, Australia
Alright well theres nothing else you have to do prior, right? eg taking the radiator out. the mechanics say no, just use a spanner or wrench, and wedge something between the four screws on the pulley and it should loosen up.
Top
 Profile  
 
 
BenJ
 Post subject: Re: Taking off Fan - ED
Posted: Mon Jun 22, 2009 7:19 pm 
Getting Side Ways
Offline

Posts: 5503

Joined: 20th May 2005

Gallery: 11 images

Ride: EB1 Fairmont Ghia T5 Wagon

Location: Seven Hills, Sydney
NSW, Australia
I think 'should' is the operative word here.

They can be VERY VERY tight.

BenJ

 

_________________

BenJ's EB T5 DOHC Ghia Wagon - Current Ride
BenJ's EB GL Sedan - Previous Ride
My respect and thanks go to - snap0964, Paulmac, SWC and MRE-50L
Top
 Profile  
 
Display posts from previous:
Sort by  
Post New Topic Reply
 Page 1 of 1  [ 9 posts ] 
Jump to:  

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

Who is online

Users browsing this forum: Google Adsense [Bot] and 48 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Thu Nov 28, 2024 11:26 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names