Fordmods Logo

The EF needs a Head Job 

 

Page 1 of 1 [ 9 posts ] 

 
 Post subject: The EF needs a Head Job
Posted: Mon Oct 03, 2005 12:17 am 
Getting Side Ways
Offline

Posts: 413

Joined: 14th Nov 2004

Ride: 2000 AU II Fairmont Ghia

Location: Brisbane Most of the time/Sydney Some of the time
QLD, Australia

down to business...

the family owns 4 fords- one EF (the pioneer ford for us), my old eb, and 2 au's.

mums EF has the notorious ticking coming from the head. i have already pulled apaty the head, replaced all of the lifters, and so on... but the ticking has come back in a big way. i have decided it is time to open her up, and probably just put on a 'new' head.

the question is: what head do i replace it with (any compatible options? i hear the au head is good...), how much should i expect to pay, and what should i be looking out for?

i am really looking forward to some surgery on this one, it should be great fun, and lots of work... also thinking of checking the bottom end, she's at 170,000 km, and she has had quite a hard life (but dearly loved) . . .

 

_________________

Organza 2000 AU 2 Fairmont Ghia
4.0 VCT
JMM Race Series Exhaust
AWC TS50 Front bar
3.45 LSD

Coming soon:
G&D Airbox
CAPA Edit

Top
 Profile  
 
 
Posted: Mon Oct 03, 2005 1:10 am 
Parts Gopher
Offline

Age: 37

Posts: 95

Joined: 8th Apr 2005

Location: perth
WA, Australia

mate is it wen u first start it up? if so drop the oil and replace it, should go away. are you sure its the head making noise no the injectors?
Top
 Profile  
 
 
Posted: Mon Oct 03, 2005 2:10 am 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 927

Joined: 6th Nov 2004

Ride: BA Falcon EGas

Location: Perth
WA, Australia

I think it means you need to go to a thicker oil.
Clearances have increased in size.

 

_________________

BA Falcon Futura on EGas. Stock as...

EF 5 speed manual; PH 4480 Pacemaker Headers; 2 1/2" Lukey Mandrel Bent System; Hi Flow Walker Cat; Stage 3 Crow Cam; ChipTorque Chip; 3" Mandrel Bent Intake; K&N Pod Filter; Low Pedders Suspension; 17" EL GT Champagne Rims; RPM Series Clutch

Top
 Profile  
 
 
Posted: Mon Oct 03, 2005 10:20 am 
Getting Side Ways
Offline

Posts: 413

Joined: 14th Nov 2004

Ride: 2000 AU II Fairmont Ghia

Location: Brisbane Most of the time/Sydney Some of the time
QLD, Australia

negative to both those...

its coming from #5 or 6 the most, ive tried both thicker and thinner oils, all to no avail...

the injectors must be fine, as the ticking went away when i changed the lifters. when i changed them, there were blockages in the oil lines which i cleaned out by blasting the air compressor...

i think im best off changing the head.

 

_________________

Organza 2000 AU 2 Fairmont Ghia
4.0 VCT
JMM Race Series Exhaust
AWC TS50 Front bar
3.45 LSD

Coming soon:
G&D Airbox
CAPA Edit

Top
 Profile  
 
 
Posted: Mon Oct 03, 2005 10:29 am 
Getting Side Ways
Offline

Posts: 413

Joined: 14th Nov 2004

Ride: 2000 AU II Fairmont Ghia

Location: Brisbane Most of the time/Sydney Some of the time
QLD, Australia

to add to that, ive tried disconnecting the injectors one by one, the ticking does not diminish at all...

the noise as acutally close to #4, but its something within the head. i dont know whether it could be a sticky valve or what, but the easiest thing would be to replace the head.

 

_________________

Organza 2000 AU 2 Fairmont Ghia
4.0 VCT
JMM Race Series Exhaust
AWC TS50 Front bar
3.45 LSD

Coming soon:
G&D Airbox
CAPA Edit

Top
 Profile  
 
 
Posted: Mon Oct 03, 2005 11:47 am 
Getting Side Ways
Offline
User avatar

Age: 47

Posts: 1780

Joined: 31st Jan 2005

Gallery: 10 images

Ride: 07 BF mk2 E-gas wagon + eb 5.0

Power: 174 rwkw

Location: Adelaide
SA, Australia

it could just be that one of the lifters is crook again.

 

_________________

eb v8: low loud and fast. just how a v8 should be. i guess the big question is, is it fast enough...

Top
 Profile  
 
 
Posted: Mon Oct 03, 2005 1:12 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 927

Joined: 6th Nov 2004

Ride: BA Falcon EGas

Location: Perth
WA, Australia

janek wrote:
negative to both those...

its coming from #5 or 6 the most, ive tried both thicker and thinner oils, all to no avail...

the injectors must be fine, as the ticking went away when i changed the lifters. when i changed them, there were blockages in the oil lines which i cleaned out by blasting the air compressor...

i think im best off changing the head.


The best way to clean your lifters is this way:

#1: Drain oil, leave oil filter in place.
#2: Add 1/2 new oil 1/2 kerosene.
#3: Idle car for 20mins.
#4: Drain oil and remove filter.
#5: Add new oil and new filter.

Done!

Its what I did and I've never had a problem since. I don't see how lifter ticking can be cause by a dodgy head. Maybe a valvetrain but not a head.

 

_________________

BA Falcon Futura on EGas. Stock as...

EF 5 speed manual; PH 4480 Pacemaker Headers; 2 1/2" Lukey Mandrel Bent System; Hi Flow Walker Cat; Stage 3 Crow Cam; ChipTorque Chip; 3" Mandrel Bent Intake; K&N Pod Filter; Low Pedders Suspension; 17" EL GT Champagne Rims; RPM Series Clutch

Top
 Profile  
 
 
Posted: Mon Oct 03, 2005 5:50 pm 
Smokin em up
Offline

Age: 64

Posts: 213

Joined: 6th Nov 2004

Ride: Falcon RTV

Location: Maryborough
QLD, Australia

Could it be a crack in a oil passage etc., There is a guy up here who has the same problem.Repacing ajusters only works for a short while before ticking again.I think he said it was a oil gallery in the block???
Top
 Profile  
 
 
Posted: Mon Oct 03, 2005 7:20 pm 
Getting Side Ways
Offline

Posts: 413

Joined: 14th Nov 2004

Ride: 2000 AU II Fairmont Ghia

Location: Brisbane Most of the time/Sydney Some of the time
QLD, Australia

yup, have done the kero trick, just with diesel...

i think there is a massive blockage abnd the lifters are getting starved. i really need to pull it all apart to have a look at it. like i said, it did cop a hell of a lot of punishment from my brother... and now we all reap the rewards...

anyone know what sort of price i should be looking at for a 2nd hand head in good nick?

 

_________________

Organza 2000 AU 2 Fairmont Ghia
4.0 VCT
JMM Race Series Exhaust
AWC TS50 Front bar
3.45 LSD

Coming soon:
G&D Airbox
CAPA Edit

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 9 posts ] 

Who is online

Users browsing this forum: No registered users and 102 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sun Nov 24, 2024 5:32 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names