|
| twr7cx |
|
|||
|
Anyone whose done thermo fan conversion able to point me in the right direction for this one please. A guys got an ED, and has EF thermo fans from the wrecker.
http://users.tpg.com.au/adsleq58/thermo/01parts.htm Anyone got a part number or anything for the thermo switch to be used? Or do Davies Craig do a full kit with everything needed included? |
|||
| Top | |
|||
| ReGiE |
|
|||
|
daies craig have the thermo switch which is all u need apart from relays and wire and the fans (Derr)
_________________ Gooooone - Eb2 Coon - 143RWKW |
|||
| Top | |
|||
| voxace |
|
|||
|
I think it's the 0404 kit you want.
|
|||
| Top | |
|||
| twr7cx |
|
|||
|
voxace wrote: I think it's the 0404 kit you want.
So that's a kit with all the relays, thermo switch and that? Or that's just the kit with a thermo switch? Thanks for the part number though! |
|||
| Top | |
|||
| voxace |
|
|||
|
Check out their site.
|
|||
| Top | |
|||
| madmax |
|
|||
|
twr7cx wrote: voxace wrote: I think it's the 0404 kit you want. So that's a kit with all the relays, thermo switch and that? Or that's just the kit with a thermo switch? Thanks for the part number though! When I did my EA, the thermo switch was just that nothing more. I don't see why he has used 2 relays. I used just the one for both fans and never had any trouble.
_________________
|
|||
| Top | |
|||
| XRated |
|
|||
|
You can also try to get your hand on a Honda or Ford Capri thermostat switch. I know the Capri one plugs straight into the lower thermostat housing (the bleeder valve I assume) and activates at the same operating temperature as the Falcon. The Honda one activates about two degrees earlier, but I think it slots in fine too.
I've got the Capri switch, I just need to figure out how the wiring works! |
|||
| Top | |
|||
| voxace |
|
|||
|
XRated wrote: You can also try to get your hand on a Honda or Ford Capri thermostat switch. I know the Capri one plugs straight into the lower thermostat housing (the bleeder valve I assume) and activates at the same operating temperature as the Falcon. The Honda one activates about two degrees earlier, but I think it slots in fine too.
I've got the Capri switch, I just need to figure out how the wiring works! Where do you get them from but? I used to have the davies craig kit, but I took it out in favour of running it off the EL computer. But that doesn't work properly. I want to go back to a thermo switch, but not the 'leaky' davies craig pain in the a** (even though I still have it lying around.) So any more info would be great thanks mate. |
|||
| Top | |
|||
| bfturb |
|
||
|
the switch is easy just wire it all up and switch the (-)neg wire from the realy so run the (-) from the relay to the switch and from the switch to the motor or body
_________________ No dose No Care |
||
| Top | |
||
| XRated |
|
|||
|
voxace, try Ford. I think they are pricey but they give you the factory look. I called Repco and they didn't have them.. Got mine from a mate.
|
|||
| Top | |
|||
| madmax |
|
|||
|
voxace wrote: XRated wrote: You can also try to get your hand on a Honda or Ford Capri thermostat switch. I know the Capri one plugs straight into the lower thermostat housing (the bleeder valve I assume) and activates at the same operating temperature as the Falcon. The Honda one activates about two degrees earlier, but I think it slots in fine too. I've got the Capri switch, I just need to figure out how the wiring works! Where do you get them from but? I used to have the davies craig kit, but I took it out in favour of running it off the EL computer. But that doesn't work properly. I want to go back to a thermo switch, but not the 'leaky' davies craig pain in the a** (even though I still have it lying around.) So any more info would be great thanks mate. If the leak is the only reason you don't like davis craig switch put plenty of selastic around the rubber pad inside the top hose.
_________________
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 60 guests |
