|
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
i have a mate who has a set of EF XR8 thermos for 80 bucks which i am going to buy. Now, i wanna know a kit or the way to wire it so the thermo's will turn on when the A/C switch is on and so the dual stage cooling fans works when needed etc. Any help?
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| alfy12 |
|
|||
|
I think the easiest way would be to use the davies craig sensor kit whick fits under your radiator hose. You could also tap into the a/c clutch wire and fit a relay to activate the thermos when the aircon is on. Many forum members have gone down this path.
The complicated way is to fit an EL ecu, borrow the relays from an EL and connect it into the EB wiring. I think there is also a slight difference between the EF and EL thermo fans. (EF 2 speed on 1 of the fans?) I think option 1 would be the easiest and cheapest way. There is a technical doc in the resource area describing the various thermo fan systems and wiring. Maybe helpful.
_________________ NF Fairlane: Non Factory Dual Fuel - New coolant tank, New fuel injectors, New fuel pump, New earth cable, ECU capacitors replaced, New O2 sensor, leads and plugs, New Radiator/Condensor cleaned. 483,000kms. AU I6 Powered. Struts, Shockies, Tie rods and ball joints replaced. |
|||
| Top | |
|||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
alfy12 wrote: I think the easiest way would be to use the davies craig sensor kit whick fits under your radiator hose. You could also tap into the a/c clutch wire and fit a relay to activate the thermos when the aircon is on. Many forum members have gone down this path. The complicated way is to fit an EL ecu, borrow the relays from an EL and connect it into the EB wiring. I think there is also a slight difference between the EF and EL thermo fans. (EF 2 speed on 1 of the fans?) I think option 1 would be the easiest and cheapest way. There is a technical doc in the resource area describing the various thermo fan systems and wiring. Maybe helpful. cheers. how do i get one of these kits you speak about? and how much?
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| alfy12 |
|
|||
|
The Davies-Craig switch assy with relay is about $85 (Part Number 0404. from the web site). Burson's should stock it or can get it for you. The relay allows the a/c system to switch the fans on.
Had a think about what I said last night and I would connect the relay up to you aircon switch/aircon relay and not the clutch wire. That way the fan runs the whole time the aircon is on. Not just when the clutch engages.
_________________ NF Fairlane: Non Factory Dual Fuel - New coolant tank, New fuel injectors, New fuel pump, New earth cable, ECU capacitors replaced, New O2 sensor, leads and plugs, New Radiator/Condensor cleaned. 483,000kms. AU I6 Powered. Struts, Shockies, Tie rods and ball joints replaced. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot], hudsonhawk69 and 89 guests |
