|
| fairmont 1 |
|
||
|
hi guys, dont want to use ford thermostats. want to use aftermarket.
what after market brands are there. i know theres tridon, slant, dayco. what aftermarket brand do you reccommend of thermostat. is there a gasket between the top and bottom thermostat housing or is it only a o ring. does it matter if it doesnt have the pin in the housing as i was told it didnt. how long does it have to take for the temperature gauge to read operating temperature as my gauge works but never gets in the low normal just stays in cold area |
||
| Top | |
||
| t_sar |
|
|||
|
Sounds like your thermostat is stuck open. My EF had the same problem until I fixed it last weekend.
I used a Dayco, it was what the bloke behind the counter at Repco gave me. Only the o-ring is supplied. I didn't use a gasket but used that blue gasket sealer between the metal surfaces. My car takes a couple of minutes to creep up into normal in the morning while warming up at about 1500 rpm. |
|||
| Top | |
|||
| fairmont 1 |
|
||
|
does the dayco one have the pin in it. is the slant one any good to use or is the dayco better.
where in the gauge does it read. my hoses only seem to just get warm. im putting thermo fans in and im trying a new thermostat. using a 92 degree one and a tridon tfs 148 switch for the fans. |
||
| Top | |
||
| t_sar |
|
|||
|
I'm sorry but I don't know what you mean by the thermostat having a pin. Maybe another forum member can help you there.
Before I replaced the thermostat the temp needle would stay in the "C" area of the gauge. It would creep into Normal if I was stuck in traffic. Now that it's fixed, it stays on the "A" in Normal. |
|||
| Top | |
|||
| fairmont 1 |
|
||
|
is there such thing as a gasket between the top and bottom housings or not.
what i mean is a bleeder pin hole somewhere on those thermostats |
||
| Top | |
||
| muncher2002 |
|
|||
|
bluemax selant works a treat
t_sar wrote: Sounds like your thermostat is stuck open. My EF had the same problem until I fixed it last weekend.
I used a Dayco, it was what the bloke behind the counter at Repco gave me. Only the o-ring is supplied. I didn't use a gasket but used that blue gasket sealer between the metal surfaces. My car takes a couple of minutes to creep up into normal in the morning while warming up at about 1500 rpm.
_________________ need a rotisserie for a classic resto 0471525912 Tom |
|||
| Top | |
|||
| muncher2002 |
|
|||
|
only new to fords but on most cars you can make one out of an old cornflakes box if it needs it
fairmont1 wrote: is there such thing as a gasket between the top and bottom housings or not.
what i mean is a bleeder pin hole somewhere on those thermostats
_________________ need a rotisserie for a classic resto 0471525912 Tom |
|||
| Top | |
|||
| t_sar |
|
|||
|
The thermostat did have pin hole and you can get a gasket if you choose to.
|
|||
| Top | |
|||
| alfy |
|
|||
|
mums ED has the same problem... hmm stuck open. the thermostat is only a few months old
 ah well will have to get a new one.
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 66 guests |
