|
| shazza9275 |
|
||
|
when its below about 3500rpm there is absolutely no power and then it all comes in one hit
anyone had a problem like this? |
||
| Top | |
||
| jerrytorry |
|
|||
|
it sounds like your BBM Butterflys are staying open. they should open up at 3800 and be closed below 3800. so to me it sounds like the BBM isn't working properly
_________________ |
|||
| Top | |
|||
| shazza9275 |
|
||
|
any way to fix this or ? what exactly is your bbm ?
|
||
| Top | |
||
| jerrytorry |
|
|||
|
im not 100% sure if that is your problem, but thats what it sounds like.
shazza9275 wrote: any way to fix this or ? what exactly is your bbm ? It's the your intake manifold, it looks kinda like a snail
_________________ |
|||
| Top | |
|||
| ebtickford2 |
|
||
|
sounds like the bbm line has come off / stoped working when you start the car go to the engine and pull the vacuume line of the bbm actuator if it moves its ok if not start looking fot the reason you have no vacuume
_________________ EBII ED Grill AU rebult motor ea t5 gli upgraded to xrghia |
||
| Top | |
||
| ebtickford2 |
|
||
|
the bbm actuator is the dome thing just above the top rad hose with the rod coming out of it
_________________ EBII ED Grill AU rebult motor ea t5 gli upgraded to xrghia |
||
| Top | |
||
| ELboy |
|
||
|
It will definitely not be the bbm butterflies, you will not lose heaps of torque from using the shorter runners. I find the ford 4.0 has heaps of power under 3500rpm no real top end power but more bottom end power then a vt 5.7. As a fully qualified mech who does a lot of work on fords id say check timing get it tuned by ford if its ef, cat muffler or fuel filter could be blocked, check plugs and leads could even be a vacuum leak somewhere, also iv seen ea - ed's with worn throttle cables that felt real limp. Will need more info to help more
|
||
| Top | |
||
| misk_one |
|
|||
|
also check cam timing..
_________________ XG Panelvan |
|||
| Top | |
|||
| FORDom |
|
||
|
ELboy wrote: It will definitely not be the bbm butterflies, you will not lose heaps of torque from using the shorter runners. I find the ford 4.0 has heaps of power under 3500rpm no real top end power but more bottom end power then a vt 5.7. As a fully qualified mech who does a lot of work on fords id say check timing get it tuned by ford if its ef, cat muffler or fuel filter could be blocked, check plugs and leads could even be a vacuum leak somewhere, also iv seen ea - ed's with worn throttle cables that felt real limp. Will need more info to help more can u explain that a little more? how does ford tune ef's?? |
||
| Top | |
||
| ELboy |
|
||
|
FORDom wrote: ELboy wrote: It will definitely not be the bbm butterflies, you will not lose heaps of torque from using the shorter runners. I find the ford 4.0 has heaps of power under 3500rpm no real top end power but more bottom end power then a vt 5.7. As a fully qualified mech who does a lot of work on fords id say check timing get it tuned by ford if its ef, cat muffler or fuel filter could be blocked, check plugs and leads could even be a vacuum leak somewhere, also iv seen ea - ed's with worn throttle cables that felt real limp. Will need more info to help more can u explain that a little more? how does ford tune ef's?? Why i say take it to ford for a tune is cos there computer and software is worth over 100k your average workshop use cheap hand held scanners that are crap. When i say tune im not talking about dyno tuning. Reading the first post again, it sounds like a major flat spot, it could be your coil pack on its way out, blocked injectors fuel filter even air cleaner, really it could be 1 of a million things you need to give it a good tune up they will scan ecu if you have mechanical knowledge just ask them not to touch anything they will give you a print out of what they find then you can go from there |
||
| Top | |
||
| FORDom |
|
||
|
ELboy wrote: FORDom wrote: ELboy wrote: It will definitely not be the bbm butterflies, you will not lose heaps of torque from using the shorter runners. I find the ford 4.0 has heaps of power under 3500rpm no real top end power but more bottom end power then a vt 5.7. As a fully qualified mech who does a lot of work on fords id say check timing get it tuned by ford if its ef, cat muffler or fuel filter could be blocked, check plugs and leads could even be a vacuum leak somewhere, also iv seen ea - ed's with worn throttle cables that felt real limp. Will need more info to help more can u explain that a little more? how does ford tune ef's?? Why i say take it to ford for a tune is cos there computer and software is worth over 100k your average workshop use cheap hand held scanners that are crap. When i say tune im not talking about dyno tuning. Reading the first post again, it sounds like a major flat spot, it could be your coil pack on its way out, blocked injectors fuel filter even air cleaner, really it could be 1 of a million things you need to give it a good tune up they will scan ecu if you have mechanical knowledge just ask them not to touch anything they will give you a print out of what they find then you can go from there do u know if there gear will work on a modified engine, im running a au engine in an ef with a j3..i just feel something isn't right and wouldn't mind getting a diagnosis from ford them selves.. |
||
| Top | |
||
| 67RCE |
|
||
|
ROFL at Ford being the best place to service a 15 yr old Falcon
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| TROYMAN |
|
||
|
yea lol..
ford service departments have trouble diagnosing and fixing problems in 5 year old cars let alone a modified 15 year old car.. 
|
||
| Top | |
||
| rogers |
|
||
|
yer on my ea it had no kickdown in t auto and no power down low and it was a worn throttle cable
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 136 guests |
