|
naughtyfalcon |
|
|||
|
what would be the most likely cause of a rattle in the timing chain area, it only does from 1300 to 1500 rpm, under is fine and over is fine.
surges a bit on idle sometimes. ea 4litre eb engine.
_________________ |
|||
Top | |
Shortshift |
|
|||
|
I had a chain rattle from an original timing chain with 200,000+km on it. It stopped after a new timing kit was put in. After removing it, I found it was stretched.
Otherwise, it may be a broken chain guide or faulty tensioner.
_________________ AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection |
|||
Top | |
madmax |
|
|||
|
It is more than likely a broken tensioner or or one of the lower guides. The tensioner when working will usually take up a little stretching in the chain.
The upper guide you usually get away with if its just the top broken off
_________________
|
|||
Top | |
naughtyfalcon |
|
|||
|
thanks for all the replies,,but it turns out the noise isn't comeing from the timeing chain at all, the alternator was loose and was fibrating in its mount, i took it the mechanic i had it booked into for the 18th so he could have a listen, he said straight away its not the timeing chain, he's a ford nut.
so they took the alternator belt off and the noise all but went away, checked the bottom nut and bolt and they were loose. so i changed the rocker gear, the tensioner and replaced what i thought to be a dead lifter all for nothing...
_________________ |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 81 guests |