|
| EDXR6-Poly |
|
|||
|
can anyone help me with setting the cam timing on the VCT head there is an arrow and a straight line where do they point to when the crank is at TDC? The line is 90 degrees clockwise of the arrow (IF THE ARROW IS POINTING STRAIGHT UP THE LINE IS LEVEL WITH THE INTAKE SIDE OF THE HEAD IS THIS RIGHT?)
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
| Top | |
|||
| TROYMAN |
|
||
|
the dot is the mark to use for the cam timing....
|
||
| Top | |
||
| EDXR6-Poly |
|
|||
|
my cam gear dosen't have a DOT it has an ARROW do i use this as the (dot) mark and if so where is the line supposed to line up to?
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
| Top | |
|||
| TROYMAN |
|
||
|
hmm mine only has a dot and a line..
it will be the mark that is in line with the cam dowl... dont worry about the line.. when fitted to a au engine there are yellow chane links that the lines match up with when the engine is in a certain position to help with alignment of cas and crank position. here is a pic of my cam gear.. Attachment: DSC01760.JPG [ 135.01 KiB | Viewed 213 times ] |
||
| Top | |
||
| EDXR6-Poly |
|
|||
|
So the dor goes where the ed timing mark is? or the dot goes level with the intake side of the head?
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
| Top | |
|||
| TROYMAN |
|
||
|
i think your getting confused???
the ed cam gear mark is normally just above the intake side of the head / rockercover gasket surface.. and the dot on the au cam gear also goes just above the intake side of the head/ rockercover gasket surface.. now if you look at both the timing dot/mark is in line with the cam dowl aswell.. |
||
| Top | |
||
| EDXR6-Poly |
|
|||
|
ok so no matter what as long as the motor is TDC on No1 and the cam dowel is at 3 o'clock (inlet side) the timing should be right(arrow/dot) and the line goes where or is the line on the cam gear not relevant?
damn AU parts are confusing me
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
| Top | |
|||
| TROYMAN |
|
||
|
EDXR6-Poly wrote: ok so no matter what as long as the motor is TDC on No1 and the cam dowel is at 3 o'clock (inlet side) the timing should be right(arrow/dot) and the line goes where or is the line on the cam gear not relevant? damn AU parts are confusing me yes.. the line on the au gear is not relivant when using it on a ed.. the thing that makes it confusing is the ed cam gear has a line on it.. and the au has a line and a dot.. but yes as you have stated above is right.. and just to be sure the valves on no 1 cyl should be closed when on tdc on compression stroke |
||
| Top | |
||
| EDXR6-Poly |
|
|||
|
right well then saying that im off to finish putting the VCT head/cam and unit on my car and the BBM back on and see how i go cheers TROYMAN much appreciated
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 138 guests |
