|
| Campbell18 |
|
|||
|
hey guys
just after some positive or negetive feedback from the people who are running the wade 1636 profile in an auto? im looking at puting one in my ED, just want to know what its like? cheers
_________________ ED 4.0L auto... pacemaker PH4480, Aus Pac Catback exhaust, wade 1636 with j3 tune =130rwkw |
|||
| Top | |
|||
| GeZza200 |
|
||
|
Its really good cam, has power from the get go and fades out at 4000-4500rpm. Its really torquey in the mid range as well. Good cam for towing or just normal everyday driving, it makes it more effortless. I made 140rwkw with the cam. I have the 1673 now its not as punchy off the line but has more power and pulls to redline.
Cheers
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| Campbell18 |
|
|||
|
thats good to hear
were you running the cam with an auto? what mods did you make to reach 140rwkw?
_________________ ED 4.0L auto... pacemaker PH4480, Aus Pac Catback exhaust, wade 1636 with j3 tune =130rwkw |
|||
| Top | |
|||
| shazza9275 |
|
||
|
did you have to put lifters and stuff with the 1636 ? how much did it set you back
|
||
| Top | |
||
| GeZza200 |
|
||
|
Im using an auto, if you look under my sig you will see the car domain link, i had all the mods listed there except for the SCT chip and bigger injectors and yeah the different cam.
You will need to put shims in, you need to put the standard size shims on top of the original ones. It cost around $300ish to put the cam in and that was including the shims (the mechanic had shims at his place).
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| Shortshift |
|
|||
|
I had a 1636 in my old 3.9L engine, last year, running with an auto. It hunted a little at idle because it needed a bit more fuel pressure (a mechanic pointed it out when dynotuning the car). The car went even better after I installed a 3.7 diff. As mentioned, it's got plenty of oomph in low-mid range.
I've still got a set of 12 shims here for the EA-EB 14mm rocker arms.
_________________ AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection |
|||
| Top | |
|||
| phongus |
|
|||
|
You'll only need to put extra shims into the rocker arms if you get a regrind. If you get the billet camshaft, then no need for shims. I believe springs don't need to be upgraded for the 1636, if you plan on getting a bigger cam later on, might as well upgrade the springs now. 1636 works well with the auto. If you want more information, visit the sponsor section.
phong =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| clampy |
|
||
|
are the shims u put in, are they like 6-10mm in diameter and 12 of them????
_________________ EL Futura 5 speed factory:PH47FL goneeeee |
||
| Top | |
||
| Shortshift |
|
|||
|
EA-ED rocker gear use 14mm dia. shims and the EF-EL use 11mm dia. shims. And as phongus mentioned, you'll need an extra shims if you get a reground cam (one in each rocker).
_________________ AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection |
|||
| Top | |
|||
| clampy |
|
||
|
yeah thats what i got 11 mm got 12 of them so im right......
_________________ EL Futura 5 speed factory:PH47FL goneeeee |
||
| Top | |
||
| Campbell18 |
|
|||
|
hey guys, just bought a reground 1636
does this mean ill need 2 shims in each rocker?? factory shims plus another set to compensate for the regrind? cheers
_________________ ED 4.0L auto... pacemaker PH4480, Aus Pac Catback exhaust, wade 1636 with j3 tune =130rwkw |
|||
| Top | |
|||
| krisisdog |
|
|||
|
Spot on.
|
|||
| Top | |
|||
| clampy |
|
||
|
installing my cam this arvo hopefully it goes alright . Cant wait to get it in lol
_________________ EL Futura 5 speed factory:PH47FL goneeeee |
||
| Top | |
||
| shazza9275 |
|
||
|
dont forget to let us know how it all goes
|
||
| Top | |
||
| clampy |
|
||
|
all done took 2 hours but dont lol and goes awesome just need the chip retuned....
_________________ EL Futura 5 speed factory:PH47FL goneeeee |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 47 guests |
