|
| hornet |
|
|||
|
Correct, I've got performance springs on my head, and the head has never been off the car.
_________________ 5 Speed EL Futura
|
|||
| Top | |
|||
| Blu Falc |
|
|||
|
I think you will just need an air compressor with a fitting so it connects to the sparkplug hole to replace the springs without taking off the head
|
|||
| Top | |
|||
| voxace |
|
|||
|
Or chuck a string down the spark plug hole and wind to TDC
|
|||
| Top | |
|||
| animal_ef |
|
||
|
can some one explain the specs of this cam... i dont understand!!!
thanks!!!!!! "206deg@50 512thou lift 113LSA" |
||
| Top | |
||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
voxace wrote: Or chuck a string down the spark plug hole and wind to TDC
i had to do that on the weekend. forgot to bring the air fitting home from work |
||
| Top | |
||
| Wade Cams |
|
|||
Age: 71 Posts: 565 Joined: 8th Nov 2004 Ride: 2011 Kia Optima Platinum Location: Melbourne |
10,000_Fists wrote: Why wade? why not try a Jay's RPD stage 2 or 3
Why not a Wade Cam.......hmmmmm? |
|||
| Top | |
|||
| animal_ef |
|
||
|
would i need a new chip to run this cam?
|
||
| Top | |
||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
tensixty6 wrote: 10,000_Fists wrote: Why wade? why not try a Jay's RPD stage 2 or 3 Why not a Wade Cam.......hmmmmm? because jays cams work better. yes i have used both yours and jays in my car. |
||
| Top | |
||
| Felony |
|
|||
|
tickford_6 wrote: tensixty6 wrote: 10,000_Fists wrote: Why wade? why not try a Jay's RPD stage 2 or 3 Why not a Wade Cam.......hmmmmm? because jays cams work better. yes i have used both yours and jays in my car. You just simply cant beat wade on what you get for a mere $122.50, not everyone can afford between 300-500 on a cam, so dont bag them dood...... Cheers
_________________ Succesful trades with bentles_eb, Pane, chunkz, xr8_dismantler, OBS35N, mrnasty, Steady ED, voxace, Mash85, ovo616, ef biff, lukey, dazza2924, Seannyb, gunit18, jkk, Tocchi, |
|||
| Top | |
|||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
Felony wrote: tickford_6 wrote: tensixty6 wrote: 10,000_Fists wrote: Why wade? why not try a Jay's RPD stage 2 or 3 Why not a Wade Cam.......hmmmmm? because jays cams work better. yes i have used both yours and jays in my car. You just simply cant beat wade on what you get for a mere $122.50, not everyone can afford between 300-500 on a cam, so dont bag them dood...... Cheers well if when you fit this wade cam your car is now SLOWER it gives you every right to bag them. dood |
||
| Top | |
||
| animal_ef |
|
||
|
what wade cam did u have?
|
||
| Top | |
||
| smoke_ |
|
|||
|
a car went SLOWER down the 1/4 mile with a wade in it??
which one?
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
| Top | |
|||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
was a 1004.
installed with a vernier gear and setup as per wade specs. emailed wade a few times about it and the reply i got was "it's bigger, it has to be faster" they offered no help at all. at the most i was expecting maybe 0.1 sec improvment, but after about 20 runs down the strip alot of checking of the car and defferent aproaches at getting the car down the 1/4 nothing worked and nothing was wrong with the car |
||
| Top | |
||
| smoke_ |
|
|||
|
fair enough, that don't sound right though.
i just bought an ef xr6 auto that needs a head done on it, and was gonna throw a cam in it just to see how much better it drives.
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
| Top | |
|||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
i yeah one thing i didn't mention, with the wade cam it had a really really really BAD timing chain rattle. so bad in fact my dad could hear it coming up the street OVER my exhaust. that cam was the single biggest waste of my time and money ever. and for the product and after sales service i can't speak low enough of wadecams.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 109 guests |
12.06@120MPH