|
Slabz |
|
||||||
|
hey guys. just wondering if any1 can tell me exactly what this thing is and how does it work? its got 3 wires and a vacuum line hose connector. it came from an EF and i think (hope) its to control the BBM.
i'm also wondering how it connects to the vacuum lines on the BBM manifold pictured also? (if it is the bbm controller)
_________________ EBII 4.0L GLi | T5 | 3.27 Spool | POD | KKK K27 Turbo | 600x300x76 FMIC | 40mm Wastegate (dead) | RPD Stg1 Cam | B&M Launch Control | Thermos | 3" Dump | Twin 2.25" Zorst | 197kw@3500rpm, 7psi LEAN!
|
||||||
Top | |
twase |
|
|||
|
Slabz wrote: hey guys. just wondering if any1 can tell me exactly what this thing is and how does it work? its got 3 wires and a vacuum line hose connector. it came from an EF and i think (hope) its to control the BBM. That is a map sensor and it does not directly connect to the vacuum connector shown in the second pic. It measures Manifold Absolute Pressure (Vacuum) so the ECU can determine engine loading and thus supply the correct fuel ratio via the injector pulses
i'm also wondering how it connects to the vacuum lines on the BBM manifold pictured also? (if it is the bbm controller) Cheers TW.
_________________ BF Fairmont Ghia Series II update. |
|||
Top | |
toynwitu |
|
|||
|
wat he said^^^^^
_________________ stage2cam,lukeyheaders,highflowcat2 1/2, 2 1/2 exhaust 3 hotdogs, 17x235/45 17x255/40's |
|||
Top | |
Slabz |
|
|||
|
thanks guys. there goes $10
_________________ EBII 4.0L GLi | T5 | 3.27 Spool | POD | KKK K27 Turbo | 600x300x76 FMIC | 40mm Wastegate (dead) | RPD Stg1 Cam | B&M Launch Control | Thermos | 3" Dump | Twin 2.25" Zorst | 197kw@3500rpm, 7psi LEAN!
|
|||
Top | |
twase |
|
|||
|
Slabz wrote: thanks guys. there goes $10 Sounds like Ebay.
_________________ BF Fairmont Ghia Series II update. |
|||
Top | |
madmax |
|
|||
|
This is the BBM controller Solenoid.
I just found that one out today thanks to EFFalcon. It is hidding behind the washer bottle
_________________
|
|||
Top | |
Slabz |
|
|||
|
i see... any1 wanna sell one??
_________________ EBII 4.0L GLi | T5 | 3.27 Spool | POD | KKK K27 Turbo | 600x300x76 FMIC | 40mm Wastegate (dead) | RPD Stg1 Cam | B&M Launch Control | Thermos | 3" Dump | Twin 2.25" Zorst | 197kw@3500rpm, 7psi LEAN!
|
|||
Top | |
Slabz |
|
|||
|
victory is mine. i just scored the solenoid thingo for $15 from the wreckers
_________________ EBII 4.0L GLi | T5 | 3.27 Spool | POD | KKK K27 Turbo | 600x300x76 FMIC | 40mm Wastegate (dead) | RPD Stg1 Cam | B&M Launch Control | Thermos | 3" Dump | Twin 2.25" Zorst | 197kw@3500rpm, 7psi LEAN!
|
|||
Top | |
GTBob |
|
|||
|
Ask the guys at FTG and also ask for the wiring connector if you can
_________________ Rotten Old Revhead!!! XW GTHO + EF ex cop car (exractors 2.5 cat back zorst !6" Simmons K&N +airbox mods Lowered with Bilstein shocks+Whiteline Bars NEXT THING Swap HO for GTP or Ferrari! |
|||
Top | |
Slabz |
|
|||
|
i've got all i need: solenoid, hoses, wiring. but thanks anyway GTBob
_________________ EBII 4.0L GLi | T5 | 3.27 Spool | POD | KKK K27 Turbo | 600x300x76 FMIC | 40mm Wastegate (dead) | RPD Stg1 Cam | B&M Launch Control | Thermos | 3" Dump | Twin 2.25" Zorst | 197kw@3500rpm, 7psi LEAN!
|
|||
Top | |
madmax |
|
|||
|
Slabz wrote: victory is mine. i just scored the solenoid thingo for $15 from the wreckers
Good stuff, list price from fraud is $150
_________________
|
|||
Top | |
Slabz |
|
|||
|
genuine is such a rip off... don't suppose anyone knows about the wiring for it?
does it just run off 12V and have a positive and a negative so i can activate it via a relay?
_________________ EBII 4.0L GLi | T5 | 3.27 Spool | POD | KKK K27 Turbo | 600x300x76 FMIC | 40mm Wastegate (dead) | RPD Stg1 Cam | B&M Launch Control | Thermos | 3" Dump | Twin 2.25" Zorst | 197kw@3500rpm, 7psi LEAN!
|
|||
Top | |
GTBob |
|
|||
|
Slabz wrote: genuine is such a rip off... don't suppose anyone knows about the wiring for it?
does it just run off 12V and have a positive and a negative so i can activate it via a relay? Power comes from eecV pin20 on EF 0 power to 3800rpm then12-14.5v above 3800rpm
_________________ Rotten Old Revhead!!! XW GTHO + EF ex cop car (exractors 2.5 cat back zorst !6" Simmons K&N +airbox mods Lowered with Bilstein shocks+Whiteline Bars NEXT THING Swap HO for GTP or Ferrari! |
|||
Top | |
Slabz |
|
|||
|
GTBob wrote: Slabz wrote: genuine is such a rip off... don't suppose anyone knows about the wiring for it? does it just run off 12V and have a positive and a negative so i can activate it via a relay? Power comes from eecV pin20 on EF 0 power to 3800rpm then12-14.5v above 3800rpm excellent, thanks GTBob
_________________ EBII 4.0L GLi | T5 | 3.27 Spool | POD | KKK K27 Turbo | 600x300x76 FMIC | 40mm Wastegate (dead) | RPD Stg1 Cam | B&M Launch Control | Thermos | 3" Dump | Twin 2.25" Zorst | 197kw@3500rpm, 7psi LEAN!
|
|||
Top | |
opto |
|
|||
|
Whats the go Slabz, you doin a BBM changeover ?
_________________ I post here cos the russian tank driver doesn't |
|||
Top | |
Who is online |
---|
Users browsing this forum: Google [Bot], Google Adsense [Bot] and 101 guests |