|
ausedwagon |
|
|||
|
after pulling the head off the ed after it stopped some of the pistons have clean spots, any ideas?
_________________ 94 White ED Wagon |
|||
Top | |
TROYMAN |
|
||
|
usually from water entering the combustion chamber..... although my old ed engine was clean around the whole outer edge of the pistons but mine was burning huge amounts of oil..
|
||
Top | |
Dazmonster |
|
||
|
Yeh Id agree. I reckon its from water, washing (turning to steam) the piston crowns clean. Was it missing ?.. Regards Darren.
|
||
Top | |
EFFUTURA4.05SP |
|
|||
|
How many kms does your engine have? My 370,000km and 270,000km engines were both alot cleaner than that.
Might want to run some Nulon upper engine cleaner through it once its going again.. Apologies for the random comment.
_________________ 1996 EF Futura factory manual |
|||
Top | |
Pakrat |
|
||
|
Looking at the pots you have worse troubles then clean spots.
|
||
Top | |
ausedwagon |
|
|||
|
Yeah the motors knackered. The aux gear has gone
_________________ 94 White ED Wagon |
|||
Top | |
bry40l |
|
|||
|
Pakrat wrote: Looking at the pots you have worse troubles then clean spots. Thats what I thought.
_________________ BF XR6 |
|||
Top | |
cjh |
|
|||
|
||||
Top | |
EFFUTURA4.05SP |
|
|||
|
cjh wrote: Here's a pic of some clean pistons........ Thats one shiny heater pipe
_________________ 1996 EF Futura factory manual |
|||
Top | |
cjh |
|
|||
|
EFFUTURA4.05SP wrote: cjh wrote: Here's a pic of some clean pistons........ Thats one shiny heater pipe and it currently doesn't leak, either........
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
Top | |
EFFUTURA4.05SP |
|
|||
|
cjh wrote: EFFUTURA4.05SP wrote: cjh wrote: Here's a pic of some clean pistons........ Thats one shiny heater pipe and it currently doesn't leak, either........ Is it just a polished factory one? Looks good.
_________________ 1996 EF Futura factory manual |
|||
Top | |
cjh |
|
|||
|
EFFUTURA4.05SP wrote: cjh wrote: EFFUTURA4.05SP wrote: cjh wrote: Here's a pic of some clean pistons........ Thats one shiny heater pipe and it currently doesn't leak, either........ Is it just a polished factory one? Looks good. No, it's just paint. When I do cyl head gasket jobs, I clean and paint the engine blocks again, makes the job more presentable, and gives a new clean surface to look at if it should fail again, makes it easier to see.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 58 guests |