|
twr7cx |
|
|||
|
I notice that twason and macxr8 seem to be installing/have installed AU VCT into there earlier model E-series. I did a search and havn't found any threads with any info on this - anyone able to direct me to such a thread? Or any info the people whove done it can share?
|
|||
Top | |
macxr8 |
|
||
Age: 55 Posts: 451 Joined: 3rd Jan 2005 Ride: AU XR6 with BF Turbo engine Location: Sydney |
depends on wether you use AU I or later. I am running AU II and it was a real b**ch to do as I also had to run the smartshield system. Took me approx 60 hrs to meld the looms
_________________ RIP 1x confused Falcon..EL Falcon with full AU running gear...VCT, 5 speed, IRS, AUII front suspension, brakes, and steering RIP |
||
Top | |
twase |
|
|||
|
twr7cx wrote: I notice that twason and macxr8 seem to be installing/have installed AU VCT into there earlier model E-series. I did a search and havn't found any threads with any info on this - anyone able to direct me to such a thread? Or any info the people whove done it can share? You are right there is not much information, there is quite a few questions on it but very few facts.
_________________ BF Fairmont Ghia Series II update. |
|||
Top | |
macxr8 |
|
||
Age: 55 Posts: 451 Joined: 3rd Jan 2005 Ride: AU XR6 with BF Turbo engine Location: Sydney |
Yea there was no info at all when I did mine. Luckily for me I have the Factory manual for the EF/EL, and managed to get some info from Ford on the AU diagrams. Most of the colors are the same with a few odd exceptions that I cant remember now. The biggest problem is putting it in and testing to make sure it all works, as if it doesnt its a dash out job to trace it
_________________ RIP 1x confused Falcon..EL Falcon with full AU running gear...VCT, 5 speed, IRS, AUII front suspension, brakes, and steering RIP |
||
Top | |
twr7cx |
|
|||
|
macxr8 wrote: Yea there was no info at all when I did mine. Luckily for me I have the Factory manual for the EF/EL, and managed to get some info from Ford on the AU diagrams. Most of the colors are the same with a few odd exceptions that I cant remember now. The biggest problem is putting it in and testing to make sure it all works, as if it doesnt its a dash out job to trace it
I guess this is your oportunity to change that... Feel free to write a doco/how to guide! |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 79 guests |