|
| falcon4litreOHC |
|
|||
|
The El 6cyl has a whizzing(whistleing) noise which gets louder as you rev the car, it sounds like the noise from the pwr steer when you turn your wheels in a stationary position.
It gets louder with revs and as engine comes down from say 3500rpm it gets less and less loud. But it isn't loud when you turn the car around in a carpark only when you get the revs up in a straight line. Any idea's I though it might be the pwr steer pully but it does it when the car is in the shed at idle in park( no load on the rack) Could it just be a noisy pwr steer pump? I have put a new belt on and no signs of leaks anywhere (car has done 135000km on the odometer) |
|||
| Top | |
|||
| Kit |
|
|||
|
I'm having these issues at the moment.
Did the twin idler tension pulleys today. Doing the water pump in 20 days. All these has shot bearing. The water pump makes a tinny thrashy bearing noise with revs. s**t me all this. |
|||
| Top | |
|||
| hard_lab0r |
|
||
|
Sounds like idler pulley is U/S.
I just replaced mine on an I6, cost me $88.00 at Denmac ford, Darra. Fixed the noise 
_________________ "Do you know what nemesis means? The righteous manifestation of an appropriate agent of retribution, in this case, a horrible C***, me!"
|
||
| Top | |
||
| concorde |
|
|||
|
claim the noise is a suedo-charger (kind of like a super charger but not).
thats what i did for 6 months, people thought it was supercharged. but yeah, sounds like the tensioner pulleys.
_________________ 2nd Place Summernats19 SQ Comp, Street Pro 0-600 Class
|
|||
| Top | |
|||
| Kit |
|
|||
|
concorde wrote: claim the noise is a suedo-charger (kind of like a super charger but not).
thats what i did for 6 months, people thought it was supercharged. but yeah, sounds like the tensioner pulleys. Either that or they thought you had a bad pulley with bad bearings, and thought you were a lazy d***head for not fixing it for 6 months 
|
|||
| Top | |
|||
| Alaskan EL |
|
||
|
Mines making a squeeking noise atm, its really annoying, the new exhaust helps though, cant hear hear it as much
|
||
| Top | |
||
| falcon4litreOHC |
|
|||
|
Problem was fixed today, replaced the tensioner pulleys, whizzing sound is no more.
|
|||
| Top | |
|||
| concorde |
|
|||
|
Kit wrote: concorde wrote: claim the noise is a suedo-charger (kind of like a super charger but not). thats what i did for 6 months, people thought it was supercharged. but yeah, sounds like the tensioner pulleys. Either that or they thought you had a bad pulley with bad bearings, and thought you were a lazy d***head for not fixing it for 6 months Always someone with the negative attitude.
_________________ 2nd Place Summernats19 SQ Comp, Street Pro 0-600 Class
|
|||
| Top | |
|||
| smoke_ |
|
|||
|
does anyone know if the tensioner bearings are able to be pressed out?
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
| Top | |
|||
| Kit |
|
|||
|
concorde wrote: Kit wrote: concorde wrote: claim the noise is a suedo-charger (kind of like a super charger but not). thats what i did for 6 months, people thought it was supercharged. but yeah, sounds like the tensioner pulleys. Either that or they thought you had a bad pulley with bad bearings, and thought you were a lazy d***head for not fixing it for 6 months Always someone with the negative attitude. Are you serious, I wasn't. I was joking witchya dude
|
|||
| Top | |
|||
| Kit |
|
|||
|
smoke_rubber wrote: does anyone know if the tensioner bearings are able to be pressed out?
The pulleys themselves are only about $24.00 ea anyway. |
|||
| Top | |
|||
| concorde |
|
|||
|
Kit wrote: concorde wrote: Kit wrote: concorde wrote: claim the noise is a suedo-charger (kind of like a super charger but not). thats what i did for 6 months, people thought it was supercharged. but yeah, sounds like the tensioner pulleys. Either that or they thought you had a bad pulley with bad bearings, and thought you were a lazy d***head for not fixing it for 6 months Always someone with the negative attitude. Are you serious, I wasn't. I was joking witchya dude Sorry man, i got sacked today, not in the best mood myself.
_________________ 2nd Place Summernats19 SQ Comp, Street Pro 0-600 Class
|
|||
| Top | |
|||
| smoke_ |
|
|||
|
Kit wrote: smoke_rubber wrote: does anyone know if the tensioner bearings are able to be pressed out? The pulleys themselves are only about $24.00 ea anyway. is that fraud pricing or spare parts pricing from coventry, repco, etc?
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
| Top | |
|||
| Kit |
|
|||
|
Coventrys I think. That actually might be trade price.
|
|||
| Top | |
|||
| smoke_ |
|
|||
|
cool, i know a mate at coventry's so i can prob get it even cheaper.
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 37 guests |
12.06@120MPH