|
| noodle |
|
||
|
Hey any one know what the wires are used for or how they need to be wired a diagram would be great anyone HHHEEEEELLLLLLLLLPPPPPPPP please
|
||
| Top | |
||
| Walker |
|
|||
|
As long as it's an electronic from an XD/E then the 2 wires from it go to + and - of the coil, all you need is 12 volt ign wire to the + of the coil and you're in business.
|
|||
| Top | |
|||
| noodle |
|
||
|
I have the negative from the coil to earth and positive to switched power the distributor has three wire insid a sheath brown / black with brown / yellow and green all three inside a sheath like a coaxial cable any ideas where the ones from the distributor go
|
||
| Top | |
||
| Walker |
|
|||
|
You don't need to earth the neg terminal mate, one of the dizzy wires runs to that, also use it for a tacho.
I can't remember the colour wires as it's been a while, i'm guessing there is a brown plug, one of the wires has a small blade terminal and the other has a loop? |
|||
| Top | |
|||
| jaikai |
|
||
|
What are you trying to do mate...? the wiring you mention is EST wiring, only good for a car with EST setup:
-Yellow/green: pinout 3 -Brown: pinout 2 -Black/orange: pinout 15 did you replace your dizzy or something...? JAIKAI |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 143 guests |
