Hi guyz,
just wondering if you can put a BF Xr6 turbo head setup on the normal Xh series2 xr6 bottomend and anything i should know able would be much appreciated
thx

nope.

slap a whole turbo motor up in dat b**ch, worrrd

Hi and welcome to Fordmods.

Unfortunately, the twin cam heads off the BA onwards do not fit on the E Series blocks. The only option is to install the complete Barra engine, and this is still a relatively new modification. There are a couple of shops offering drive in drive out conversions, including CMS one of the site sponsors.

Or you can have a go at it yourself, like I am.

Cheers
BenJ

just slap a turbo on the xh engine, will work out cheaper in the end...

thanks guy for the info, where is a place that i can get turbo info in Sutherland shire, St George area in Sydney and i will be doin all the work myself since im a machanic

Go and talk to Con and Vince, C&V Performance @ taren point. Once you have done that, Call Joe @ Cresent motor sport at Liverpool. Most places can supply the gear no problems, but you really want to work in with a tuner who can get it to work well. Crescent has plenty of experience in tuning the E series falcons, Certainly slap the gear on yourself then get them to tune it.

Buy a Snort kit. comes complete, solid history with providing turbo setups for the falcons. Both Crescent and Snort are site sponsors, they will always try and do the right thing by you.

Where about in the shire are you?