hey everyone ive been looking at getting some amps from china its something i do for a living so chill mate ive never got a crappy product yet i do my research its all good stuff and genuine to

now the reason im asking this is i want this amp to power my new sub (450 Watts RMS at 4Ohms) but the problem is i have to buy a min of 3 of them but they work out to be 265AUD each thats damn cheap especially for a class D now i priced this gear from a local distributor in Australia and he wanted $800AUD for 1

now according to my research this is competition amp and some damn good gear at that ive personally talked with many people around the world (over the phone or email) with people who have this brand of amp and they love em

so heres the deal i need minimum 2 people who are interested in the amps (you dont have to risk any money ive got enough) you just gotta express your interest and say you will 100% buy them if i get them in it will be first pay first serve just in-case interest grows massively and when i get them in and ive tested them and they work and do what they are meant to i will post on here they are in and the first to pay for them will get there very own amp

if you leave a deposit this will guarantee you get a amp

$265AUD + postage from my address in NSW to your place is the price people im not making a dime on them i just want to get my money back this is alot cheaper than paying $400 odd + postage for a 400W RMS class D in australia (was the cheapest class D i could find and i didnt have the SN this one has)

specs of the AMP



Description:
Model:XP-1200.1
Class-D mono car amplifier
Super-efficient Class-D PWM design
High-efficiency MOSFET power supply
Nickel plating RCA Jack/Golden die-casting terminal
Two Amps Linkable: Output Master And Input Slave(YES)
Short circuit / overheating / overload / DC excursion protection
Wired Remote Controller (YES)
signal transition RCA output (YES)
delayed control turn-on / off circuitry
Fully 1Ω stable operation (Mono only) circuit
Subsonic filter (Mono only) (YES)
Variable phase shift (Mono only)
Heavy-duty heatsink
Oversized capacitor capability
Adjustable bass boost gain control (YES)
Power supply / protect LED indicate lamp

Specification
Model:XP-1200.1
Type:Class-D Mono Car amplifier
* Perfect printing circuit wafer through hole epoxy
* 1 ohm stabilizing circuit
* two amplifier link function: Main output and input
* efficiency: 86% @ 4 ohms, in 100Hz
* 24db/Oct invariable overlapping
* Protection circuits (overheat/overcurrent /speaker short circuit or DC protection)
* the bridge joint signal receives another SLAVE input from the main engine SLAVE output
* input sensitivity: 200mv - 6V
* variable frequency: 10Hz - 60Hz
* invariable bass boost: 0 - 18db
* Low pass: 35Hz - 300Hz
* variable phase: 0 - 180 degrees
* zero (0) counts the power source coupling
* signal/noise ratio: 91 - 100dB
* damping factor: +350
* THD: less than 1% 14.4V
* working voltage: DC input 10V - 16V
* wired remote controller
* fuse:20AX4
* output power:
RMS 1200 WX1ch @ 1 ohm
RMS 650 WX1ch @ 2 ohm
RMS 450 WX1ch @ 4 ohm
*Master/Slave: two amplifier linkable
* size: Length (320 mm) * width (260 mm) * highly (55 mm)
Weight: NW( 5.5 kg)/GW ( 6 kg)

the looks of the amp

{DESCRIPTION}
{DESCRIPTION}

sorry if this is in the wrong area of the forum i wasnt sure were to post it