Fordmods Logo

6x9 help 

 

Page 1 of 1 [ 15 posts ] 

 
 Post subject: 6x9 help
Posted: Sun Jan 13, 2008 9:05 pm 
Getting Side Ways
Offline

Age: 36

Posts: 852

Joined: 15th Nov 2007

Location: melbourne
VIC, Australia

Hi i have a EF fairmont and i want to add 6x9's
what is the best thing to do with the car.
post pics of your own cars for some ideas please
also where is the best place to get spacers. thank you

Image
Top
 Profile  
 
 
Posted: Tue Jan 15, 2008 1:02 pm 
Getting Side Ways
Offline

Posts: 783

Joined: 15th Jan 2008

Ride: Pink Lancer On Spinners

Location: Melbourne
VIC, Australia

Hey. You can get the 6x9s sitting flat in your parcel shelf by taking out your parcel shelf and tracing it onto a bit of mdf board. Then you just put it back in screw the mdf down and then put the parcel shelf back in. Will stop alot of the rattle doing it this way aswell.

But if you reall wanna go down the road of using spacers everywhere sells them. JB Autobarn repco etc. JB seems to have the best ones tho
Top
 Profile  
 
 
Posted: Tue Jan 15, 2008 1:04 pm 
Getting Side Ways
Offline

Age: 37

Posts: 1798

Joined: 14th Jun 2006

Gallery: 7 images

Ride: FG 50th Anni G6E Turbo

Location: Melbourne
VIC, Australia

Daniel,
As above, i did that in my EA and worked a treat.. just cut the appropriate hole for speaker, and screw it into the MDF. No problems.
Top
 Profile  
 
 
Posted: Wed Jan 16, 2008 1:03 pm 
Stock as a Rock
Offline

Age: 37

Posts: 198

Joined: 20th Feb 2007

Ride: Falcon

Location: Melbourne
VIC, Australia

I'd use speaker spaces! Eaiser!
Top
 Profile  
 
 
Posted: Wed Jan 16, 2008 1:30 pm 
Getting Side Ways
Offline

Age: 36

Posts: 852

Joined: 15th Nov 2007

Location: melbourne
VIC, Australia

yeah there alot easier. all the dam spacers at those stores are crappy and too high
Top
 Profile  
 
 
Posted: Wed Jan 16, 2008 3:17 pm 
Tyre Shredder
Offline
User avatar

Age: 35

Posts: 354

Joined: 11th Dec 2007

Ride: ED Futura Classic & EF Futura SW

Location: Scummers
VIC, Australia

make some that you like. thats what i might do.
Top
 Profile  
 
 
Posted: Wed Jan 16, 2008 3:51 pm 
Getting Side Ways
Offline

Age: 37

Posts: 1798

Joined: 14th Jun 2006

Gallery: 7 images

Ride: FG 50th Anni G6E Turbo

Location: Melbourne
VIC, Australia

{USERNAME} wrote:
I'd use speaker spaces! Eaiser!


They dont look as good.. i hate it when i see 6x9 raised up on the back shelf.. it looks heaps better when they are flush in the shelf. Its better to spend the time to get the results.
Top
 Profile  
 
 
Posted: Wed Jan 16, 2008 9:24 pm 
Tyre Shredder
Offline
User avatar

Age: 35

Posts: 354

Joined: 11th Dec 2007

Ride: ED Futura Classic & EF Futura SW

Location: Scummers
VIC, Australia

This was said in the topic i started in the mods part.

"this was just asked over in the audio section, mdf across the whole shelf seems popular, probably sounds a lot better too... im still tossing up spacers or mdf shelf... i used an mdf shelf in one of my older cars and it worked a treat, sounded great too..."
Do you mean put a mdf shelf over the steel shelf, or replace the steel shelf with mdf?

thought id post it here too so daniel000 got the answer too :)
Top
 Profile  
 
 
Posted: Thu Jan 17, 2008 12:10 am 
Getting Side Ways
Offline

Age: 36

Posts: 852

Joined: 15th Nov 2007

Location: melbourne
VIC, Australia

ok done and done. I have just used spacers .

Now the problem is that the head unit will only sit on the bottom half of where the stacker used to go, close to the ash tray.

Can you somehow get a shelf that will sit on top? because all i no is that the come as a whole with the shelf connected to the bottom side of it....
Top
 Profile  
 
 
Posted: Thu Jan 17, 2008 10:18 am 
Stock as a Rock
Offline

Age: 42

Posts: 187

Joined: 30th Dec 2006

Ride: 95 EF I

Location: Melbourne
VIC, Australia

you cant replace the steel, its part of the car... if you cut into it ive heard it makes your car unroadworthy, though i doubt it would ever get picked up unless you made it really obvious... i havent looked at the shelf for a while but from memory the carpet is glued onto the steel shelf, not sure if it would just pull off or if you would have to cut out an mdf shelf, carpet that and screw it onto the steel shelf... i really need to get out and work on my car more...
Top
 Profile  
 
 
Posted: Thu Jan 17, 2008 11:08 am 
Getting Side Ways
Offline

Age: 36

Posts: 852

Joined: 15th Nov 2007

Location: melbourne
VIC, Australia

Yeh i wasnt intending on replacing the whole steel frame behind the stereo.
I was looking at replacing the plastic around it which holds the ash tray and that, but i was looking for a shelf that will just sit on top.

Ill show everyone some images of my situation.

Image

---

Image
Top
 Profile  
 
 
Posted: Thu Jan 17, 2008 3:40 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 4946

Joined: 15th Nov 2004

Gallery: 2 images

Ride: Trik'd up EFII XR6

Location: Perth
WA, Australia

Sorry i havent really read through this whole thread but why not see a wrechker and purchase the single din facia?

 

_________________

For Sale: 25 Farad Rockford Fosgate Competition Series Carbon Cap, more to come - pm me if interested

Top
 Profile  
 
 
Posted: Thu Jan 17, 2008 3:53 pm 
Getting Side Ways
Offline

Age: 36

Posts: 852

Joined: 15th Nov 2007

Location: melbourne
VIC, Australia

yeah been from the wreckers and figured everything out.
stupid screws were to thick and were hitting each side of the car when sliding the hu in.

Got the EL radio facia with the tray on the botton.

Thanks for all your help guys

cheers
Top
 Profile  
 
 
Posted: Thu Jan 17, 2008 4:36 pm 
Stock as a Rock
Offline

Age: 42

Posts: 187

Joined: 30th Dec 2006

Ride: 95 EF I

Location: Melbourne
VIC, Australia

cr@p sorry, ignore my post, i was talking about the rear shelf where your 6x9s are haha not the stereo surround bit... thats not structural and id say you can mod that no worries... sorry for the confusion!
Top
 Profile  
 
 
Posted: Fri Jan 18, 2008 12:22 am 
Getting Side Ways
Offline

Age: 36

Posts: 852

Joined: 15th Nov 2007

Location: melbourne
VIC, Australia

haha no problem dude, i got it all done and im really happy with it. first sorta mod ive done since i got the car.

time for some more!
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 15 posts ] 

Who is online

Users browsing this forum: No registered users and 19 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Wed Dec 25, 2024 1:46 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names