|
| ducati119 |
|
|||
|
just baught a new amp. its a response 1000w rms mono block and im running 2 pioneer 400 rms subs off it. drove to work and evrything worked fine, come back from work, turn on the car and theres no bass. the amp had its power light on but was not powering the subs. now that light isnt on. going to take it back and ask whats wrong because nothing looks like anything is wrong.
any ideas?
_________________ Real Men Smoke Rubber |
|||
| Top | |
|||
| kovac |
|
||
|
did you check to see if the fuse powering the amp is blown
i had a problem with a sony explode 1000w amp to power my 650w he2 rockford sub (installed by strathfield) didnt get out of the driveway and the sub wasnt working took it back to them and found out that the chips inside the amp were fried
_________________ there is only 2 rules in driving go hard or go home |
||
| Top | |
||
| FLASH |
|
|||
|
Sony
 ... say no more.
Id say check fuses and wiring with the responce.
_________________ FALCAHOLIC |
|||
| Top | |
|||
| ducati119 |
|
|||
|
ye i changed the fuse even though it looked fine. where is the fuse in the amp because i opened it up and couldnt find any. is that because the amp is digital?
heres a link of what amp it is: www.jaycar.com.au/productView.asp?ID=AA ... BCATID=595
_________________ Real Men Smoke Rubber |
|||
| Top | |
|||
| outlawxr6 |
|
|||
|
{USERNAME} wrote: ye i changed the fuse even though it looked fine. where is the fuse in the amp because i opened it up and couldnt find any. is that because the amp is digital?
heres a link of what amp it is: www.jaycar.com.au/productView.asp?ID=AA ... BCATID=595 Now that you have opened it up don't be surprised if they say seeya no warranty.... What impedance load do you have connected to it?
_________________ Do it once, Do it right!!!!!! |
|||
| Top | |
|||
| ducati119 |
|
|||
|
amp didnt end up being the problem. had a mate come over and we plugged my amp up to his sub and evrything worked. so had to be my wiring. so i checked evrything but all looked fine but then i checked my line converter and fidled around with the wires that are spliced into my rear speakers and it started working, ended up being that one of the wires just came loose so all is good again.
thanks evryone for your help 
_________________ Real Men Smoke Rubber |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 13 guests |
