|
| ducati119 |
|
|||
|
wuld 6X9's fit in the 5X7 holls or shuld i just go 4 a new set of 5X7's?
wat hav people got?
_________________ Real Men Smoke Rubber |
|||
| Top | |
|||
| EL XR8 |
|
|||
|
I don't know if 6x9's will fit or not. If you have some lying around, you could just try them and see. But i would think that they might just be a bit big forthe original holes.
I know fusion do a 5x7" speaker, as my mate has recently put them in his BA, and he seems happy with them. |
|||
| Top | |
|||
| SHADOW_351 |
|
|||||
|
i have 6x9sx in mine... (required custom shelf but)
|
|||||
| Top | |
|||||
| cheersdude |
|
|||
|
6x9's dont fit.. just get some 5x7's especially if your going to run a sub?
_________________
|
|||
| Top | |
|||
| Gregg_13 |
|
|||
|
Ive got 6x9's in My ute in the back in place of the 5x7's. just used a baffle plate. and got 6" splits in the front doors, also just use a baffle plate
_________________ nascentes morimur |
|||
| Top | |
|||
| richard williams |
|
||
Age: 55 Posts: 535 Joined: 22nd Sep 2005 Ride: EF wagon & EF fairmont wagon & M Location: melbourne |
just not in a wagon tailgate or you get bashed on the head from the extra weight. I just swapped back to 6" because of this even with new struts. waste of money that was.!
|
||
| Top | |
||
| 98fairmont |
|
|||
|
I have got 6x9s in my AU (also uses 5x7s stock), what I have done is used a small spacer and mounted them from below (see pic). I've still got the factory grilles there covering them up. The only other option would be to use a spacer and mount the 6x9s from above because they will not fit in the 5x7 holes.
|
|||
| Top | |
|||
| Shum's EL |
|
|||
|
i'd make a plate up and use 6 inches
|
|||
| Top | |
|||
| cooki_monsta |
|
|||
|
{USERNAME} wrote: i'd make a plate up and use 6 inches
2nd that
_________________ Mods: sprint kit, steeda short shift, svo lip, El handles, El Air intake, au xr wheels, lukey cat back, jbl focal and pioneer sterio <--- Sold |
|||
| Top | |
|||
| Shum's EL |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: i'd make a plate up and use 6 inches 2nd that maybe even splits |
|||
| Top | |
|||
| krisisdog |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: i'd make a plate up and use 6 inches 2nd that maybe even splits Dont bother with splits in the rear. Use 6" splits up front and 2/3 way 6" speakers in the rear. If you're only after a small sound quality increase you can run them off the HU, but get an amp if you're serious. A 4ch with splits off front and sub off rear is a great start. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 28 guests |
