Fordmods Logo

DImming lights 

 

Page 1 of 2 [ 17 posts ] Go to page 1, 2  Next

 
 Post subject: DImming lights
Posted: Mon Jun 29, 2009 9:18 pm 
Tyre Shredder
Offline
User avatar

Posts: 347

Joined: 23rd May 2008

Ride: AU series 1 XR6

Location: hartley
SA, Australia

ive got a 2gauge earth + all 2 gauge wiring + platinum distribution/fuse box + a 2.4 farad cap + expensive 700ish cca battery brand new
i still get lights dimming a bit when turned up high why would that be
The only thing I can point to would be the amps drawing lots of power due to being cheap and inefficent

 

_________________

MY BUILD THREAD
{DESCRIPTION}

Top
 Profile  
 
 
 Post subject: Re: DImming lights
Posted: Tue Jun 30, 2009 7:55 pm 
Smokin em up
Offline

Age: 33

Posts: 218

Joined: 27th Apr 2008

Ride: EF Fairmont

Location: Perth
WA, Australia

what amps are you using
Top
 Profile  
 
 
 Post subject: Re: DImming lights
Posted: Tue Jun 30, 2009 8:49 pm 
Tyre Shredder
Offline
User avatar

Posts: 347

Joined: 23rd May 2008

Ride: AU series 1 XR6

Location: hartley
SA, Australia

crappy Boss amps ive got 2
they put out "stated" 250wrms to each sub but knowing the amps s**t I set the gains using a multimeter to give out around 200w rms to each sub
then the other amp supplies power to the rears and fronts

still even with those amps with 2gauge wireing and a capacitor it shouldnt dim lights should it??

 

_________________

MY BUILD THREAD
{DESCRIPTION}

Top
 Profile  
 
 
 Post subject: Re: DImming lights
Posted: Tue Jun 30, 2009 8:56 pm 
Smokin em up
Offline

Posts: 258

Joined: 30th Dec 2007

Location: cairns
QLD, Australia

Try using a multimeter and see how many volts you are getting with car running and no accessories and then headlights and then with the sound system turned on .That will be volts at the battery and volts at the alternator battery positive.If you get more than 1/2 a volt difference between these 2 points then you will need to put a heavy duty wire to compensate.DO all the tests at idle and at 2...2 1/2 thousand revs and make sure the battery is fully charged ,it may be new but it may have sat on the shelf for a while.Keep in touch Kevman....oh yeah learn Ohm's law.Don't leave home without it :D
Top
 Profile  
 
 
 Post subject: Re: DImming lights
Posted: Tue Jun 30, 2009 9:01 pm 
Tyre Shredder
Offline
User avatar

Posts: 347

Joined: 23rd May 2008

Ride: AU series 1 XR6

Location: hartley
SA, Australia

the battery isnt completly new its been in the car for a bit over a month
as for upgrading a wire which one exactly??
I have the stock earth wire and a 2gauge one going to the car off of the battery

I havnt done the voltages at different rpm but it stays the same with the sound system on untill i crank it right up then it drops about .5v

 

_________________

MY BUILD THREAD
{DESCRIPTION}

Top
 Profile  
 
 
 Post subject: Re: DImming lights
Posted: Tue Jun 30, 2009 9:45 pm 
Smokin em up
Offline

Age: 33

Posts: 218

Joined: 27th Apr 2008

Ride: EF Fairmont

Location: Perth
WA, Australia

na mate it wouldnt be the gear because im running all alpine gear and my lights still dim a fair bit but thats in 8guage wire and with no capacitor or anything getting a capacitor within the next week tho but why is it such a problem is it only your interior lights dimming or is it your head lights and cluster lights etc ??
Top
 Profile  
 
 
 Post subject: Re: DImming lights
Posted: Tue Jun 30, 2009 9:49 pm 
Tyre Shredder
Offline
User avatar

Posts: 347

Joined: 23rd May 2008

Ride: AU series 1 XR6

Location: hartley
SA, Australia

you will probs find you alpine amps will actually draw LESS current due to being more efficent

as for the dimming its not major, the interior lights dim a bit and the headlights but not the cluster due to being modified with led's

having said that it only happens when turned up greater than about 80% which is pretty fn loud and i dont listen to it that loud whilst driving by far

 

_________________

MY BUILD THREAD
{DESCRIPTION}

Top
 Profile  
 
 
 Post subject: Re: DImming lights
Posted: Tue Jun 30, 2009 11:27 pm 
Smokin em up
Offline

Posts: 258

Joined: 30th Dec 2007

Location: cairns
QLD, Australia

{USERNAME} wrote:
the battery isnt completly new its been in the car for a bit over a month
as for upgrading a wire which one exactly??
I have the stock earth wire and a 2gauge one going to the car off of the battery

I havnt done the voltages at different rpm but it stays the same with the sound system on untill i crank it right up then it drops about .5v

I am talking about the wire between the alternator and the positive terminal of the battery.It is the alternator which supplies the power for the car and the battery is there to start the car and it would be a good idea to upgrade the earth wires as well.Cheers Kevman
Top
 Profile  
 
 
 Post subject: Re: DImming lights
Posted: Tue Jun 30, 2009 11:31 pm 
Tyre Shredder
Offline
User avatar

Posts: 347

Joined: 23rd May 2008

Ride: AU series 1 XR6

Location: hartley
SA, Australia

ahh ok that makes sense
as its the alternator that supplies the extra few volts while the cars running and the cable between the alternator is still small that extra voltage is prone to drop before the battery can make up for it.

I may look into a new alternator too.

 

_________________

MY BUILD THREAD
{DESCRIPTION}

Top
 Profile  
 
 
 Post subject: Re: DImming lights
Posted: Wed Jul 01, 2009 1:18 am 
Getting Side Ways
Offline
User avatar

Age: 52

Posts: 3424

Joined: 23rd Dec 2007

Gallery: 32 images

Ride: BA XR6T (mix of BA, BF and FG)

Location: Perth
WA, Australia

I have zero guage.... a 1 farad cap, upgraded earth links all over and 600 CCA battery and my lights still flash to the beat... Not as bad as before I got the cap and earths.. but still there abit.

If you use class D amps (like alpine PDX series) you'll use less power for a given rating but with Boss type amps.. you should consider yourself lucky you can even hear it over the engine noise. (long ago I worked at strathfield)
Top
 Profile  
 
 
 Post subject: Re: DImming lights
Posted: Wed Jul 01, 2009 2:48 pm 
Tyre Shredder
Offline
User avatar

Posts: 347

Joined: 23rd May 2008

Ride: AU series 1 XR6

Location: hartley
SA, Australia

what do u mean hear it over the engine noise, what due to the strain on the alternator
I will get decent class d amps and i was looking at focal fronts but at the moment id rather spend the money on performance/handling/speed as the sound system is still F'ING loud and reasonable quality

 

_________________

MY BUILD THREAD
{DESCRIPTION}

Top
 Profile  
 
 
 Post subject: Re: DImming lights
Posted: Wed Jul 01, 2009 5:44 pm 
Getting Side Ways
Offline
User avatar

Age: 52

Posts: 3424

Joined: 23rd Dec 2007

Gallery: 32 images

Ride: BA XR6T (mix of BA, BF and FG)

Location: Perth
WA, Australia

I mean that boss amps have a tendency to pick up any engine electrical noise and amplify it...

grunty amps though.
Top
 Profile  
 
 
 Post subject: Re: DImming lights
Posted: Wed Jul 01, 2009 6:14 pm 
Tyre Shredder
Offline
User avatar

Posts: 347

Joined: 23rd May 2008

Ride: AU series 1 XR6

Location: hartley
SA, Australia

actually ive had no engine noise problems at all

 

_________________

MY BUILD THREAD
{DESCRIPTION}

Top
 Profile  
 
 
 Post subject: Re: DImming lights
Posted: Wed Jul 01, 2009 6:21 pm 
Getting Side Ways
Offline
User avatar

Age: 52

Posts: 3424

Joined: 23rd Dec 2007

Gallery: 32 images

Ride: BA XR6T (mix of BA, BF and FG)

Location: Perth
WA, Australia

maybe they are better now than they once were...

I have a boss amp here that I was given and I took it out because it sounded like I was turbo charged whenever the volume was low.,
Top
 Profile  
 
 
 Post subject: Re: DImming lights
Posted: Wed Jul 01, 2009 6:27 pm 
Tyre Shredder
Offline
User avatar

Posts: 347

Joined: 23rd May 2008

Ride: AU series 1 XR6

Location: hartley
SA, Australia

haha lol
what rca's were you running
ive made sure im using good ones run on the opposite side of the car to the power wires

 

_________________

MY BUILD THREAD
{DESCRIPTION}

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 2  [ 17 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Dec 23, 2024 11:46 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names