|
tryandtakeme |
|
||
|
I'm putting my head unit in and trying to solder all the wires up but I have no idea which wire is which.
Can someone post the diagram for that 16 pin plug? thanks
_________________ DC LTD V8 pure style |
||
Top | |
tryandtakeme |
|
||
|
ANYONE??? PLEEEEEASE
_________________ DC LTD V8 pure style |
||
Top | |
asizzy |
|
||
|
This will def help you out.
http://www.fordmods.com/forums/Sound-Sy ... o-d27.html
_________________ AsIzZy |
||
Top | |
tryandtakeme |
|
||
|
thanks heaps mate
now i have no idea whats going on because i have one plug with 8 wires and one plug with 4 wires and it says i should have either 10 and 4 or a single 10 wire plug? i don't get it.
_________________ DC LTD V8 pure style |
||
Top | |
tryandtakeme |
|
||
|
oh lawdy will someone please help me
_________________ DC LTD V8 pure style |
||
Top | |
Krytox |
|
|||
|
all the info is on that link.
It provides you with colors, plugs and descriptions!
_________________ Carefree, we may not be number one, but we're up there. |
|||
Top | |
asizzy |
|
||
|
Its there mate....................................
HINT "< !-space->" are not wires.
_________________ AsIzZy |
||
Top | |
tryandtakeme |
|
||
|
{USERNAME} wrote: Its there mate....................................
HINT "< !-space->" are not wires. yeah i know what is there, but what it says there is different to what i have on my plug! I have it sitting here and there are orange wires that aren't on that guide and some wires on the guide that i don't have on mine...
_________________ DC LTD V8 pure style |
||
Top | |
Krytox |
|
|||
|
You do not color code you head units wires to the car loom.
You follow the wires purpose. ie: front left speaker + Head unit would probably be WHITE and the car loom wire is Blue with a Light Green stripe.)
_________________ Carefree, we may not be number one, but we're up there. |
|||
Top | |
tryandtakeme |
|
||
|
{USERNAME} wrote: You do not color code you head units wires to the car loom.
You follow the wires purpose. ie: front left speaker + Head unit would probably be WHITE and the car loom wire is Blue with a Light Green stripe.) OK, what I am trying to say, is that my car loom, does not have the exact same wires as shown in the table, i have more spaces than i should supposedly and different coloured wires in different spots. I have absolutely no idea why this is.
_________________ DC LTD V8 pure style |
||
Top | |
Krytox |
|
|||
|
Most Aftermarket Head units:
Memory (+12v Constant) Yellow Ignition (+12v Switched) Red Ground (-) Black Dimmer (+) Pink/White (Alpine) Power Antenna (+) Blue Amplifier Turn-on (+) Blue/White Phone Mute (+) Light Blue (some) S p e a k e r s Right Front (+) Gray Right Front (-) Gray/Black Left Front (+) White Left Front (-) White/Black Right Rear (+) Violet Right Rear (-) Violet/Black Left Rear (+) Green Left Rear (-) Green/Black EF/EL Dash Loom: Memory (+12v Constant) Dark Green / Yellow Stripe Ignition (+12v Switched) Dark Blue / White Stripe Ground (-) Black Dimmer (+) Brown Power Antenna (+) Red / Dark Blue Stripe Phone Mute (+) Light Green S p e a k e r s Right Front (+) Grey / Dark Green Stripe Right Front (-) Blue / Black Stripe Left Front (+) Blue / Light Green Stripe Left Front (-) Grey / Black Stripe Right Rear (+) Dark Blue / Red Stripe Right Rear (-) Dark Blue / Black Stripe Left Rear (+) Pink / Dark Green Stripe Left Rear (-) Pink / Black Stripe
_________________ Carefree, we may not be number one, but we're up there. |
|||
Top | |
Krytox |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: You do not color code you head units wires to the car loom. You follow the wires purpose. ie: front left speaker + Head unit would probably be WHITE and the car loom wire is Blue with a Light Green stripe.) OK, what I am trying to say, is that my car loom, does not have the exact same wires as shown in the table, i have more spaces than i should supposedly and different coloured wires in different spots. I have absolutely no idea why this is. Then YOU will need a multimeter or a test light, and its a good idea to have a 1.5volt battery around so you can pin point the speaker wires without killing any electrics. We can't tell you what wires go where in a molested car. I'm pretty sure you could just follow the pins on the plug, BUT if this has been cut off, you'll need to go fishing, it won't take long. easiest way to find 4 wires is look at the speakers in the parcel shelf, (there's your colors) then the front should easier, and power/dimming etc should be a piece of cake.
_________________ Carefree, we may not be number one, but we're up there. |
|||
Top | |
tryandtakeme |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: You do not color code you head units wires to the car loom. You follow the wires purpose. ie: front left speaker + Head unit would probably be WHITE and the car loom wire is Blue with a Light Green stripe.) OK, what I am trying to say, is that my car loom, does not have the exact same wires as shown in the table, i have more spaces than i should supposedly and different coloured wires in different spots. I have absolutely no idea why this is. The YOU will need a multimeter, or a test light, and its a good idea to have a 1.5volt battery around so you can pin point the speaker wires then. We can't tell you what wires go where in a molested car. how would i find out the speaker wiring with a multimeter?
_________________ DC LTD V8 pure style |
||
Top | |
asizzy |
|
||
|
How about telling us what colour wires you have and on which pins etc. Just like the Link showinf the Colour Codes. Maybe someone will be able to help then.
_________________ AsIzZy |
||
Top | |
tryandtakeme |
|
||
|
Ok.
So all the speakers are wired up now But i still have 4 remaining wires on my loom which are coloured: -Green/Yellow -Blue/White -Blue/Red -Brown and 5 wires left on my new head unit plug which are: -Dimmer -Ground -Antenna -12 Volt + -Ignition
_________________ DC LTD V8 pure style |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 14 guests |