|
| covers |
|
||
|
hey all,
im about to install a headunit into a friends au series III falcon. is there anything i hav to look out for? do they hav double din mount?? i cant quite rememba. ive installed them in els and other cars but not an au yet. any help would be much appreciated.
_________________ IF ONLY MY GIRLFRIEND WAS AS DIRTY AS MY CAR |
||
| Top | |
||
| Disco Frank |
|
|||
|
yer my xr was double din but some low spec models have a single din HU
a good idea is to get the wiring harness that plugs into the AU loom and has the loose wires out of that plug so u do not have to cut/solder into the original loom
_________________ RIP SCOTT |
|||
| Top | |
|||
| Razor7107 |
|
|||
|
as far as i know, all AU's are double din, in some you have to choose to loose the little pocket under the deck that would ussually hold phone wallet etc... just get a wiring diagram from here or google and you will be right, or go get a wiring harness..
_________________
|
|||
| Top | |
|||
| covers |
|
||
|
any idea on the price of these 'wiring harnesses'?
_________________ IF ONLY MY GIRLFRIEND WAS AS DIRTY AS MY CAR |
||
| Top | |
||
| pauly_pizza |
|
||
|
covers wrote: any idea on the price of these 'wiring harnesses'?
There pretty cheap around $20 i think..... |
||
| Top | |
||
| GraveDilute |
|
||
|
Harness is less than $20. Autobarn or similar stock them.
Depending on the depth of the 2 din unit, then you may have to angle it to fit it in. I have an Eclipse AVN6000 in mine, and it's got a fair angle (pointing down) on it due to a cross member at the rear of the stereo.
_________________ The difference between pornography and erotica is lighting. |
||
| Top | |
||
| AU_Rocket |
|
||
|
Just a tip if installing two separate single din units, I installed a clarion tv and a clarion head unit in my AU, installing the bottom unit first saves alot of time and problems as i tried the top on first and spent an hour trying to tease the bottom one in. Also placing the little rubber stick on the back of the unit in only the bottom unit and not on the top unit helps as if installed on the top unit, it wont provide enough angle for the bottom unit to sit.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Majestic-12 [Bot] and 11 guests |
