Fordmods Logo

How to run speaker wiring from door into car 

 

Page 1 of 1 [ 5 posts ] 

 
 Post subject: How to run speaker wiring from door into car
Posted: Wed Jun 04, 2008 7:21 pm 
Fordmods Newbie
Offline

Posts: 17

Joined: 9th Feb 2008

Location: Brisbane
QLD, Australia

Hey guys,

I've got an EF Fairmont and am installing some splits in the front, I was just wondering how to get the wire from the door into the car?

I've tried putting the wire through the gromett, and just can't find where it ends up??
Top
 Profile  
 
 
Posted: Wed Jun 04, 2008 7:40 pm 
Technical Contributor
Offline
User avatar

Age: 45

Posts: 4093

Joined: 20th Mar 2005

Gallery: 2 images

Ride: 2.0 Turbo VW

Power: 142 rwkw

Location: Seaford State:
VIC, Australia

You can run a coat hanger through it, just be sure to tape the end so you don't stab it, also use a little wd40 on it to slide better.

Easiest way is to remove the loom from the car, and do the above.
Make sure you run good quality wires, In fact In my car I ran 3 sets of twisted pair, you'll thank yourself when you want to run some auxillaries and theres provision already there.

Also the removal method allows you to retape the ends for that fantastic waterproofing.

 

_________________

Carefree, we may not be number one, but we're up there.

Top
 Profile  
 
 
Posted: Wed Jun 04, 2008 8:31 pm 
ACT Cruise Moderator
Offline
User avatar

Age: 43

Posts: 6249

Joined: 24th Nov 2004

Ride: '06 BF GT-P

Power: 293 rwkw

Location: Canberra
ACT, Australia

Be thankful you don't have a B series*.

You can get it through the grommet on a E series. Take's some elbow grease, and it pops out high up behind the dash, keep feeding it through and it'll pop out somewhere easily accessible.



* they have a plug between the door and the body, you have to drill out holes though it to get any wire through, or do what I did, and run it partially outside.

 

_________________

1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow
2006 BF GT-P in Ego, mods. Supercharged 5.8L all alloy modular

Top
 Profile  
 
 
Posted: Wed Jun 04, 2008 9:21 pm 
Getting Side Ways
Offline

Age: 72

Posts: 971

Joined: 11th Jan 2005

Ride: BA MK11

Location: West Melbourne
VIC, Australia

On my EB install, I used yellow tongue to push from door side and pulled the wires through. I had new wires for splits and another set I placed in the bottom of the door card. All good thick wires from Jaycar.

 

_________________

The older I get the better I was!

Top
 Profile  
 
 
Posted: Thu Jun 05, 2008 10:33 am 
Getting Side Ways
Offline
User avatar

Age: 52

Posts: 582

Joined: 20th Nov 2004

Ride: xr6

Location: Brisbane
QLD, Australia

On the El I ran 3 sets into the doors, if you remove the grommets it is pretty easy, I used a phillips head srewdriver as it is less likely to cause damage to the original wiring and taped the new wires to the srewdriver and passed it through, simple...

 

_________________

Do it once, Do it right!!!!!!

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 5 posts ] 

Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Wed Dec 25, 2024 1:16 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names