|
finnigan001 |
|
|||
|
Hi guys,
Just looking for a bit of a confirmation on wiring up a factory ford power antenna in a ef futura with aftermarket deck. I've read the tech doc and understand that you can not hook it up to the bem coz you need a high series bem and that the best way to hook it up would be to used a switch similar to the power window switch. But i have read that someone on here hooked the power acc wire from the deck to the antenna and the other wire from the antenna to the yellow wire(memory 12v) coming out of the deck to make it work. Meaning that when the deck comes on the aerial goes up and when off it comes down. So if the antenna works like an electric window, that is, 12v makes it go up and reverse polarity makes it comes down, how does wiring it up above work? Does the deck control polarity of the 12v going to the aerial or would wiring it above just leave power going to it while the deck is on? Any help muchly appreciated. I would just rather wiring it to the deck rather than have a switch that i control. Cheers Tim.
_________________ 1995 EF Futura |
|||
Top | |
horace01 |
|
|||
|
Hey Tim,
How did you get on with this. I'm looking to do the same thing. Cheers |
|||
Top | |
One Drone |
|
|||
|
Hi there,
It should be pretty easy to do and as long as the head unit has the remote wire which can also be used as an antenna control wire it should be ok. I know on Pioneer it is generally a blue wire. When you turn the head unit on, the head unit will activate the blue wire which can be used to turn on amps or a power antenna. For a power antenna, all you will need is a relay attached to this wire which controls 12v to the antenna. So whenever you turn the head unit on, the antenna will go up and when the head unit is off it will go down.
_________________ There are 10 types of people in this world. |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 11 guests |