|
| Corie383 |
|
||
|
Alright i tried finding out how to do this but cant find exactly what im looking for i plan on hooking up a sub and amp in one with nothing else running of it with the stock head unit in my ba mk 2 xl ute and i have a rca line level converter what i need to know is how exactly does it get hooked up it has + -g- + on it and before i wire it up wrong if someone could tell me which wires go where and how they need to be connected up it would be really helpful wire colour coding would also be very helpful ive searched the forums but cant find one on this if i have missed it if someone could link me to it that would be very helpful
_________________ Ba mk II XL 4speed auto |
||
| Top | |
||
| quadie |
|
||
|
use your cig lighter socket for power if reqired.
sound: tap rear speakers for sound input: RL + : pink with dark green trace RL - : pink with black trace RR + : blue with red trace RR - : blue with black trace
_________________ If u wanna rev it chev it , but if u wanna be in the next round best get a CLEVO |
||
| Top | |
||
| low_ryda |
|
|||
|
and G is normally to ground the converter itself. can help reduce noise I believe?
_________________ Not to get technical, but according to chemistry alcohol is a solution. |
|||
| Top | |
|||
| kwaussiekid |
|
||
|
I believe that the wiring for the amp and subbie is already in place,it is in my MK1,but I have to take it to ASL to have it wired.
_________________ The older I get the better I was! |
||
| Top | |
||
| quadie |
|
||
|
yes you could, BUT
the power of the stock amp is NOT good enought for any aftermarket amps. ASL do do a rca conversions to the ICC but there other options. Cheaper: LC6i from audiocontrol , MID class: Cleansweep from (i think) JL audio, PXA-800 from alpine Money is no object class: Audioson BIT.1 all will give you RCAs's and amp remote. as the cost rises trhe features rise with , time alignment, DSP and so on Power wil need to be run depending on AMP/s chosen disconnet the factory amp , as it enables filters within the ICC when connected.
_________________ If u wanna rev it chev it , but if u wanna be in the next round best get a CLEVO |
||
| Top | |
||
| Corie383 |
|
||
|
Ok so if i use the font speaker wiring seen as my ute only has door speakers it shouldnt mAke a difference? And do i just splice in and run a wire of each wire?
_________________ Ba mk II XL 4speed auto |
||
| Top | |
||
| quadie |
|
||
|
Yes mate that will be fine just remember to phase them correctly
I thought utes had rears in the side panels. I may be wrong
_________________ If u wanna rev it chev it , but if u wanna be in the next round best get a CLEVO |
||
| Top | |
||
| Corie383 |
|
||
|
Its possible its about the only part of the car i havent thoroughly inspected do you have the colour coding for the front speakers?
_________________ Ba mk II XL 4speed auto |
||
| Top | |
||
| Corie383 |
|
||
|
Alright just had a look and it definitley only has speakers in the doors, looks like the front speakers are the ones im gonna have to run it of
_________________ Ba mk II XL 4speed auto |
||
| Top | |
||
| kwaussiekid |
|
||
|
Hey quaddie, as I am on a very limited budget, is it possible to get the amp and subbie I have fitted, going, on my black MK1 screen,on the cheap?
ASL reccommend fitting the colour screen=$650,+$150 for ASL to hook up, so that the system works.
_________________ The older I get the better I was! |
||
| Top | |
||
| quadie |
|
||
|
Is it the stock amp and sub or aftermarket
Are u good with a soldering iron ?
_________________ If u wanna rev it chev it , but if u wanna be in the next round best get a CLEVO |
||
| Top | |
||
| kwaussiekid |
|
||
|
No it is all the standaed equipment, as I had already fitted the tweeters-which worked, so blindly I assumed with the wiring in place, that the subbie would work also.
_________________ The older I get the better I was! |
||
| Top | |
||
| quadie |
|
||
|
So you fitted the factory amp and sub ?
I think the low level ICC doesn't have the provision for the sub channel Does the red light on the amp come on ? Did u fit the. Factory harness or make your own ? The tweeters are driven off the font and left exisiting channels. So they don't care what ICC it's connected too.
_________________ If u wanna rev it chev it , but if u wanna be in the next round best get a CLEVO |
||
| Top | |
||
| kwaussiekid |
|
||
|
I discovered all the wiring was in place, so purshased the standard gear, and fitted it.
_________________ The older I get the better I was! |
||
| Top | |
||
| quadie |
|
||
|
ok , i think the low spec ICC dosnt have the sub channel from the icc so ASL upgrade is in order
_________________ If u wanna rev it chev it , but if u wanna be in the next round best get a CLEVO |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 28 guests |
