|
| badam |
|
|||
Age: 37 Posts: 61 Joined: 15th Apr 2008 Ride: 99 AU S1 Tickford VCT XR6 Location: Western Sydney |
Hey all, i'm about to install a single din HU into my series 1 au and i want to remove the steering wheel controls since they won't be used anymore. Anyone know how to do this? I looked behind the controls and can't really see anything.. Any help would be greatly appreciated. Cheers.
|
|||
| Top | |
|||
| Froudey |
|
||
|
do you have cruise control? you can purchase a module so you can retain the controls
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| badam |
|
|||
Age: 37 Posts: 61 Joined: 15th Apr 2008 Ride: 99 AU S1 Tickford VCT XR6 Location: Western Sydney |
Thanks for the advice guys. If i remove the airbag will it still work after i remove the controls? Also, i had a look at those screws behind the circle covers and they look like they need a special tool...
Yes i do have cruise control, but i don't really want to spend the $200+ dollars i've been quoted to keep the controls. Plus i figured that if i get a HU with a remote i won't need the steering wheel controls. Thnaks again for your help. |
|||
| Top | |
|||
| badam |
|
|||
Age: 37 Posts: 61 Joined: 15th Apr 2008 Ride: 99 AU S1 Tickford VCT XR6 Location: Western Sydney |
I forgot to ask, if i undo the screws behind the circle covers will that remove the horn cover? Cheers
|
|||
| Top | |
|||
| BOTTLEDUP |
|
|||
|
{USERNAME} wrote: Thanks for the advice guys. If i remove the airbag will it still work after i remove the controls? Also, i had a look at those screws behind the circle covers and they look like they need a special tool...
Yes i do have cruise control, but i don't really want to spend the $200+ dollars i've been quoted to keep the controls. Plus i figured that if i get a HU with a remote i won't need the steering wheel controls. Thnaks again for your help. Why not just leave them there? When/if you sell the car you can re install the standard deck and they'll work.... Just my 0.02"
_________________ TE50 T1 P01 |
|||
| Top | |
|||
| badam |
|
|||
Age: 37 Posts: 61 Joined: 15th Apr 2008 Ride: 99 AU S1 Tickford VCT XR6 Location: Western Sydney |
Yep that's the piece i meant ashcook. I didn't know that was the airbag as well! And i would leave them there but i'm just pedantic i suppose
 They don't work so why should they be there!!!?? lol if it's easy enough to take out it'll be easy enough to put back in when i do decide to sell.
Thanks again fellas. |
|||
| Top | |
|||
| Ballast |
|
|||
|
{USERNAME} wrote: Yep that's the piece i meant ashcook. I didn't know that was the airbag as well! And i would leave them there but i'm just pedantic i suppose
They don't work so why should they be there!!!?? lol if it's easy enough to take out it'll be easy enough to put back in when i do decide to sell. Thanks again fellas. Issue: Your horn, cruise and audio switches are part of the 1 loom. You can cut the 2 wires that go to the audio controls, and just insulate the ends of the wires that you cut. to put them back in, you would need to re-solder the wires. When I put the whole AU setup in my EL, I was looking at doing away with the audio controls (as the EL does not have them). In the end, I just bought the adapter (I paid $75 for a second had one on ebay), and made them work.
_________________ Remember kids, the more pages of crap in your build thread, the bigger your e-penis is |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 20 guests |
