|
| pla_inter |
|
||
|
Hi guys,
This is a really stupid question but how do u tell if your front speakers are stock or aftermarket? Do all aftermarket speakers always have the manufacturer's label on them? Also what size front speakers fit in a ED XR6 without cutting or other door panel modifications? -cheers pla_inter |
||
| Top | |
||
| Demo_efman |
|
|||
|
You can tell easy they generally have the brand that makes them on the back as well as a ford symbol too!! Also ED fronts are 6 inch speakers - so no need to cut and modify the trims
|
|||
| Top | |
|||
| pla_inter |
|
||
|
Thx for the reply! Would 6.5" fit or does that require extra cutting?
|
||
| Top | |
||
| phongus |
|
|||
|
{USERNAME} wrote: Thx for the reply! Would 6.5" fit or does that require extra cutting?
i think u can just get an MDF board and add it on top of the existing hole to raise it a bit and then cut a hole in it to fit the 6.5" speaker........correct me if im wrong phong =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| Interceptor |
|
||
|
for the millionth time....
99% o the time there is sfa difference between 6" and 6.5", different brands measure thier speakers differently, some go from the edge of the speaker basket, or the edge of the speaker cone, etc pioneer fits straight in
_________________ Banned |
||
| Top | |
||
| Whiteknight1 |
|
|||
|
Where do ford measure their 6" from?
_________________ Back in an E series! |
|||
| Top | |
|||
| Interceptor |
|
||
|
buggered if i know, because the diameter of the speaker basket is 6.22" and the diameter of the cone is less than that
but as i've said, there seem to be no hard and fast rules defining speaker size, i've got a set of 5.25" mids here that have the same scre mounting points as a pioneer 6.5"
_________________ Banned |
||
| Top | |
||
| Whiteknight1 |
|
|||
|
s**t!, anybody tried fit jaycar 6.5inch splits in?
_________________ Back in an E series! |
|||
| Top | |
|||
| pla_inter |
|
||
|
Probably best just to head into a specialist and ask them if any particular speakers will fit without cutting etc..
Also if anybody has had experience with fitting splits from Jaycar, Focal or Hertz I would like to know how it went it terms of installation. -cheers pla_inter |
||
| Top | |
||
| cooki_monsta |
|
|||
|
yes ford measured from screw holes across, hence why its 6.22" small basket 6.5's will fit, larges like the focals i put in will fit with a little modding but its not a big deal
  look at the last page of my boot install thread for a pic of what i did, basically ground out the area where the basket hit.
_________________ Mods: sprint kit, steeda short shift, svo lip, El handles, El Air intake, au xr wheels, lukey cat back, jbl focal and pioneer sterio <--- Sold |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 21 guests |
