|
chunkz |
|
|||
|
okay
no one has this wiring loom so im gunna some how still wire it. any tips? pin ====soldier==== wire (2.5cm length of solder to extend to wire can touch) or should i solder wire directly to pin which pin does which theres 3 pins coming from it.... but only 2 wires come out # remium Sound System Plug 3 - DSP Power Plug This plug is located on the lower deck, just left of the CD Stacker Connector. It is a 3 Pin Plug, with 2 wires coming from it. The function and colour of these wires are, # 1) Black - Battery Ground (Negative (-) Power) # 2) Dark Green / Yellow - Battery Power (Positive (+) Power) how do i hook it up with power? can i take power from somthing else or what do i need a fuse or what.....????
_________________ |
|||
Top | |
chunkz |
|
|||
|
common people..... PLEASE
_________________ |
|||
Top | |
offyaguts |
|
||
|
how many people have you actually tried before cutting these type of wires?
|
||
Top | |
chunkz |
|
|||
|
tried ford...they said its not for sale.. its impossible to buy the part
called a wrecker they said $110.... fook that and yeh
_________________ |
|||
Top | |
EFfalconsrule |
|
||
|
should be a fuse built in to the head unit. just take the power from the ignition switch ground it straight to the chassis.
_________________ Stage 1 stereo install done. Pics in audio section. |
||
Top | |
chunkz |
|
|||
|
only 26 posts ay...
i see your new to fordmods... well im a s**t... so explain to me like you would explain to a 12yo.... cheers
_________________ |
|||
Top | |
EFfalconsrule |
|
||
|
OK so what are you putting in then. Is it an after market hu or what?
There is a diagram on or in the box.
_________________ Stage 1 stereo install done. Pics in audio section. |
||
Top | |
chunkz |
|
|||
|
its a 2nd hand EF/EL premium head unit
no books no boxes
_________________ |
|||
Top | |
EFfalconsrule |
|
||
|
OK then all the speaker wires should be easy enough cause they should be the same colour. The power wire and earth wire that were on your old HU will be ok to re-use. Instead of a plug or anything just hard wire it straight in. Have you got any electrical tools like a test light to find out which wire is which?
_________________ Stage 1 stereo install done. Pics in audio section. |
||
Top | |
chunkz |
|
|||
|
its different
i need #3
_________________ |
|||
Top | |
EFfalconsrule |
|
||
|
Oh ok then. Well you said there were only two wires in the plug? Is that all you got? All three wires should have been there. Cause 1 is power 1 is earth and 1 is memory. Did you get a look at where they went?
_________________ Stage 1 stereo install done. Pics in audio section. |
||
Top | |
chunkz |
|
|||
|
# remium Sound System Plug 3 - DSP Power Plug
This plug is located on the lower deck, just left of the CD Stacker Connector. It is a 3 Pin Plug, with 2 wires coming from it. The function and colour of these wires are, # 1) Black - Battery Ground (Negative (-) Power) # 2) Dark Green / Yellow - Battery Power (Positive (+) Power) im guessing one pin is some kind of earth or something?
_________________ |
|||
Top | |
EFfalconsrule |
|
||
|
OK well did you see where each one of thoese wires went if you have pins that will fit on to thoese then just solder them onto the wires straight up. Make sure that they are in the same spot as before.
_________________ Stage 1 stereo install done. Pics in audio section. |
||
Top | |
chunkz |
|
|||
|
thats th ething i dont knwo where the wires are hooked on
and no one else seems to know (or reply)
_________________ |
|||
Top | |
chunkz |
|
|||
|
f**k!
one wire keeps on coming off when i solder it on... it aint easy
_________________ |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 14 guests |