|
| Tiger_Smithy |
|
|||
|
Just wondering if anyone has had any issues with those $990 ebay copies?
I really want some GT-P copies, similar to this... http://www.wheels2u.com.au/Products/804 I have heard bad things said about them but i know plenty of people use copies without any major issues, what are your thoughts on them? I see that Bob Jane sells some of his wheels really cheap, but they would be just as likely to be poor quality, wouldn't they? Also, if i should stay away from copies, what are some other cheaper, SAFE, options?
_________________ Formally 97_el_futura |
|||
| Top | |
|||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
Bob Jane or Rodney Jane racing wheels are s**t quality. i've heard of them cracking etc,
I run aftermarket AU series3 wheels. not sure of the brand but i've had them 12 months and had no troubles
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| eb_dean |
|
||
|
any wheel can "crack" though, depends on the driving conditions, if there slamming through potholes at a 100kmh all the time, or being gutter bashed, any wheel will crack. Rodney Jane wheels arent that bad at all, few mates have em and they look good. Im running genuine BA xr8 18" with the spacers, and previsously ba xr6 17". No probs with the spacers at all.
_________________ 1993 EB XR6 Factory 5spd-2.5" exhaust w/ dump pipe-Genuine BA XR8 18" wheels-K&N filter-Momo Steering Wheel-Pioneer Head Unit-Sony 12" Sub-Pioneer 600w MonoBlock 4ch Amp- Xplod 6x9's-Superlowed |
||
| Top | |
||
| Tiger_Smithy |
|
|||
|
{USERNAME} wrote: any wheel can "crack" though, depends on the driving conditions, if there slamming through potholes at a 100kmh all the time, or being gutter bashed, any wheel will crack. Rodney Jane wheels arent that bad at all, few mates have em and they look good. Im running genuine BA xr8 18" with the spacers, and previsously ba xr6 17". No probs with the spacers at all. As i don't require spacers i am more worried about the quality of these copies, i would prefer for my wheels to stay in one piece while i am behind the wheel 
_________________ Formally 97_el_futura |
|||
| Top | |
|||
| phatba |
|
||
|
i too am interested. im interested in getting some of the cobra copies, but not knowing where they come from exactly holds me back.
|
||
| Top | |
||
| madeaspack |
|
||
|
ive got 19" dark agent copy's off ebay,that were 990,my brother in law has 19" dark agents from a different seller,they are slightly different to mine,my boss has 18" ba gtp mk2 copy's of ebay and ive got a mate with 18" typhoon copy's off ebay. all of them were $900-1000 all of them balanced up well and none of us have had a problem.My boss has had his on the work ute for 2+years.
i say they're fine,but its personal preferance really
_________________ 97 el xr6,5 speed short shifter,sequential scoop,no arial,freshly resprayed,low on 17's,3 inch zorst,stainless hi flo cat,snort stage 3 stainless manifold,garrett t04e,front mount cooler,wolf 3d ecu,seimens 760cc injectors,walbro fuel pump |
||
| Top | |
||
| revhead |
|
||
|
Although wheels alter the look of your pride and joy it can be a real gamble. Big rims and low profile tyres dont mix with rough roads and potholes, one of my bosses girlfriends has a ford focus with factory alloys and has destroyed two rims in less than a year at nearly $800 each. Wether factory or after market all rims are equally open to damage.
_________________ ef fairmont ghia 5.0L
|
||
| Top | |
||
| Tiger_Smithy |
|
|||
|
I think i will just take the "gamble", but i will keep my stock rims handy just in case they need to go back on.
_________________ Formally 97_el_futura |
|||
| Top | |
|||
| arm79 |
|
|||
|
I have those wheels as genuines on my car now (but in shadow chrome), and I've buckled 2 in the year and a bit I've owned the car.
I'd be interested in seeing how much they weigh in comparison to mine, to see how much alloy is missing. Then could probably tell you how well they stand up. But seeing as Ford now source all its wheels from some dodgy s**t place in Taiwan or Thailand, these probably come out of the same factory. |
|||
| Top | |
|||
| Waggen |
|
|||
|
I have an aftermarket set of the GTP series 2's and all 4 have been repaired twice, as said.. low profile tires and s**t roads will destroy any wheel, unless they are some hectic 100spoke wires..
|
|||
| Top | |
|||
| arm79 |
|
|||
|
{USERNAME} wrote: I have an aftermarket set of the GTP series 2's and all 4 have been repaired twice, as said.. low profile tires and s**t roads will destroy any wheel, unless they are some hectic 100spoke wires.. If you ever take one off, whats the chances of you weighing it for me. I'd be interested in knowing how much metal is missing. I think my current rims weigh 28kg per corner. I remember my genuine EL GT rims weighed in at 29KG-ish per rim. And an aftermarket copy with the same tire weighed in at 21kg. 8kg of metal is alot of strength. |
|||
| Top | |
|||
| fourL6 |
|
|||
|
iv got 18" cobra copies from a Bridgestone dealer in Thomastown had them for around 2 years with no problems, the size or the rim makes a big different, ShumEL's ex had alot of problems with 20" rims on her AU3, they kept cracking and leaking, so i guess the side wall absorbs alot of potholes etc.
_________________ Was - {DESCRIPTION} |
|||
| Top | |
|||
| Tiger_Smithy |
|
|||
|
i am after 19's, hopefully due to the fact that they are usually that size standard will mean that they have less change of having faults (apart from lacking metal)
_________________ Formally 97_el_futura |
|||
| Top | |
|||
| arm79 |
|
|||
|
{USERNAME} wrote: i am after 19's, hopefully due to the fact that they are usually that size standard will mean that they have less change of having faults (apart from lacking metal) Oh you will have problems. I hope you have a good eye for potholes. Repair count so far is 2 of 5 rims. - One Rim buckled badly in 3 places, repaired - One Rim buckled in 2 places. Rim also cracked. Buckles repaired. Now good for spare or throwaway only. Hopefully the other 3 dont have cracks. I know at least one of them is buckled, maybe 2. Otherwise I'm off to Ford for new rims at $1000 each. |
|||
| Top | |
|||
| RedRocket_ebS |
|
|||
|
I've got 18" Cobra copies, have had a small crack repaired by Bob Jane, other than that no problems. Having said that, I don't remember hitting any particularly nasty potholes before the rim cracked.
When upgrade time comes I'll probably save a few extra pennies up and buy genuine.
_________________ Clowns are evil and must be killed. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 21 guests |
