sorry i ment ef fairmont ghia bonnet and front bumper like this one and just wanted to know if i need the headlights aswell because the bonnet is much flatter then the ef futura one

EF/EL Fairmont bonnets are all the same as are the Fairlane/LTD (NF/DF/NL/DL). Only things that are different are grills.

To fit a Fairmont bonnet to a GLi you will need the following;

1) Fairmont Bonnet (Of Course)
2) Farmont/Fairlane front bar.
3) Fairmont/Fairlane headlights
4) Fairmont/Fairlnae Bonnet Latch
5) Fairmont/Fairlane trim cover

Your are probably better off looking at a set of after market headlights, you will find some on Ebay, as they will be clean, or you can score some second hand units and get the lenses cleaned.
http://www.ebay.com.au/itm/Ford-EF-EL-F ... 3f0c226780
http://www.ebay.com.au/itm/Ford-EF-EL-F ... 1e63a954ef
http://www.ebay.com.au/itm/Ford-EF-EL-F ... 3f0b79446e
http://www.ebay.com.au/itm/New-Ford-EF- ... 1e62dd7253

Front Bars for the Fairmont/Fairlane are also available after markets as well.

May be able to help you out with the front, contact EVL098 on here, I know he has a Fairlane that needs to go asap and he may have some parts you are after.

With the cost involved here, have you thought about Kurnnel Customs Bonnets?

http://www.kurnellkustoms.com.au/products.htm

Hope this helps.

realise this is an old thread but have fitted the same buldge with shaker top to my EF Fairmont 5.0l an chasing some advice or ideas on how i could run my cold air induction from this rather than just being a bonnet vent

 

 

Attachments:

Y12.jpg [ 37.86 KiB | Viewed 270 times ]