|
robsa000 |
|
|||||
|
Hey, i've noticed that my front bumber (C2R kit) is sagging a bit. There is quite a noticable gap on the right side, and a small one on the left. Any ideas on how to fix this? Or off to the panel beaters? What kind of work/$$ involved with this?
|
|||||
Top | |
Happy |
|
|||
|
isn't there just a screw underneath which holds it up - have you had a look?
_________________ Owning 1 of 67612 EF GLi Sedans made
|
|||
Top | |
robsa000 |
|
||
|
yer i've had a look, but I can't see any obvious screws
|
||
Top | |
Happy |
|
|||
|
just walk into a supercheap and pick up a gregorys manual off the shelf, have a look how the bumper is held on then put it back!!!
_________________ Owning 1 of 67612 EF GLi Sedans made
|
|||
Top | |
robsa000 |
|
||
|
yer I was thinking that, but it's not the standard bumper. you think they still attach it the same?
|
||
Top | |
Leroy |
|
||
|
yeah they should all attach the same, a bracket rivited in there.
_________________ Now driving a Hilux |
||
Top | |
Black Betty |
|
||
|
There is a bracket on the corner which is held in with 3 pop rivets, check to see if the holes for the pop rivets are not slotted, if they are good your bracket is probably bent or the guard could be bent, just release the plastic liner then undo the 13mm nut holding the bumper on to the guard and have a look.
|
||
Top | |
twirqurky |
|
||
|
Hammer it back up into place
|
||
Top | |
EALCON 3.9 |
|
||
|
{USERNAME} wrote: just walk into a supercheap and pick up a gregorys manual off the shelf, have a look how the bumper is held on then put it back!!!
i tried that once but all the manuals are vacuum wrapped in plastic so u cant open them. |
||
Top | |
Bob Hall |
|
||
|
The AuUbar normally fits up there with a stud and nut arrangement. I'd imagine the C2R bar fits the same way. If so, I'd be surprised if the nut's come loose, but it's possible. If so, re-align the bar and tighten the nut well.
Cheers, Bob
_________________ Commercial Sponsor
|
||
Top | |
madmax |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: just walk into a supercheap and pick up a gregorys manual off the shelf, have a look how the bumper is held on then put it back!!! i tried that once but all the manuals are vacuum wrapped in plastic so u cant open them. Yes they have wised up to us library users.
_________________
|
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 18 guests |