|
| TheKrazeD |
|
||
|
Looking at getting my 4495's ceramic coated. I want the chrome look, or either the jet black look (to match the engine).
I'm going to do the coating myself, with the good old trusted spray can lol Would Dupli-Color High Heat Paint be enough? It says it withstands temperatures of up to 1,200 degrees F which is 648.889 degrees C.
_________________ VIXEN FG XT Previous best - 14.431 @ 99.69mph with minor mods |
||
| Top | |
||
| GeZza200 |
|
||
|
ceramic coating works great but that paint isn't going to be anything like the real stuff. Your extractors would more than likely get hotter than 600c aswell
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| TheKrazeD |
|
||
|
Where can I get the good quality stuff that's resistant above 1000c? I remember seeing it somewhere, but can't for the life of me remember where lol
_________________ VIXEN FG XT Previous best - 14.431 @ 99.69mph with minor mods |
||
| Top | |
||
| GeZza200 |
|
||
|
You can get exhaust shops to send your extractors off to a proper ceramic coating place. Pacemaker do there own coating called Cermakrome. There are a few different types.
http://pacemaker.com.au/ceramic_coat.html Cost around $250-300 to get done.
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| phongus |
|
|||
|
As Gezza said, that paint stuff won't stick for too long at all.
Ceramic coating is not colour coating. Yes you get colour out of it, but they add that in. It is actually heat cured coating (not sure of what, but could be ceramic shards or something) which gives more benefit than just looks. The coating helps reduce engine bay temp because it has insulating properties, so instead of heat wrapping them you can get them coated. Have heard engine bay temp drop a fair bit with just the coating. I got quoted $265 to get pacemaker 4480s with standard coat, sterling or hi-lustre look from Jet Hot in Castlemaine (http://www.jet-hot.com.au/) If you want colour there is an extra cost of $60 or something. Freight can be organised but prices vary. Just to let you know, the quote above was given last year in August, so pretty sure the prices will be some what higher.
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| EFFUTURA4.05SP |
|
|||
|
My extractors are painted in heat proof 3M.
It's fine. Just wire wheel them to bare, rust free metal and it lasts for a long time.
_________________ 1996 EF Futura factory manual |
|||
| Top | |
|||
| GeZza200 |
|
||
|
For the look just go paint if you want the extra performance and a lot less heat under the engine bay go ceramic
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| galapogos01 |
|
|||
Posts: 1139 Joined: 27th Feb 2005 Ride: Supercharged EF Fairmont Location: T.I. Performance HQ |
Competition Coatings in Coburg, Melbourne do great prices on ceramic coating. Great service too. Pick up and delivery of your parts. Would definitely recommend.
_________________ {DESCRIPTION} - {DESCRIPTION}, {DESCRIPTION}, {DESCRIPTION}, {DESCRIPTION} and more! |
|||
| Top | |
|||
| TheKrazeD |
|
||
|
That Dupli crap says it's ceramic. Who knows. I'll get it done in a few weeks though. I'm after looks, and also to keep the temps down as I know the comp headers get quite hot, especially with the way I drive through this sh!t city (full of morons doing 40 in 60 etc)
_________________ VIXEN FG XT Previous best - 14.431 @ 99.69mph with minor mods |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 56 guests |
