|
| Bluexr6 |
|
||
|
Im looking at getting a set of rims off ebay 18x8.5. I am just wondering though, how does a rim of this size clear the upper ball joint on the front of the EL as the 16" with the 50 series ride tyre height is not that far away from the ball joint. The rims are in a pre Au offset.
What other issues could i run into by fitting an 8.5 inch width tyre Also does anybody know what size tyres fit on a rim with that width in mm please. |
||
| Top | |
||
| eb_guy888 |
|
||
|
they will be fine man
is it lowered? if so u may have to have guard rolled a tiny bit, but thats only in some cases you should b all good |
||
| Top | |
||
| Bluexr6 |
|
||
|
Thanks. Its stock XR6 ride height
|
||
| Top | |
||
| Bluexr6 |
|
||
|
I've been told from the guy at the tyre place becuase the wheels are 8.5 wide that I might have problems with them touching the strut towers.
They wont know though until they test fit them, but they wont haqve the product in for another month. |
||
| Top | |
||
| twirqurky |
|
||
|
I had 18s on superlows on my Falcon, no issues with rubbing at all.
|
||
| Top | |
||
| Bluexr6 |
|
||
|
{USERNAME} wrote: I had 18s on superlows on my Falcon, no issues with rubbing at all. what is the width of your 18's
|
||
| Top | |
||
| twirqurky |
|
||
|
8.5s i think.
|
||
| Top | |
||
| Gaz |
|
||
|
well, elgt had 8.5 in 17's but the height/width of the overall tyre should be the same.
_________________ 2007 Steel BF Ghia MKII V8 - 19" GTP's + Superlows |
||
| Top | |
||
| MadMax19 |
|
||
|
As long as the wheels are pre au , all is fine with standard height suspension. If you get AU onward wheels , you will need 30mm adaptors for front, and 25 mm adaptors for rear.
I had this problem with mine , and with lower suspension as well.
_________________ Gotta luv the smell of burnin rubber in the mornin ! |
||
| Top | |
||
| MadMax19 |
|
||
|
tyre widths are as follows...
18 x 8 wheel.... 235 / 45 18 tyres 18 x 8.5 ..... 245 / 40 18 18 x 9 .... 265 / 35 18.
_________________ Gotta luv the smell of burnin rubber in the mornin ! |
||
| Top | |
||
| millard455 |
|
|||
|
{USERNAME} wrote: As long as the wheels are pre au , all is fine with standard height suspension. If you get AU onward wheels , you will need 30mm adaptors for front, and 25 mm adaptors for rear.
I had this problem with mine , and with lower suspension as well. whats the go with two diferent size adaptors? i just orderd a set and the bloke said nothing about thiner ones for the rear.
_________________ EL XR8 SERIES 2, 5SPD, HOT CHILLI RED, 200 ODD RWKW OF V8 FUN AND GAMES |
|||
| Top | |
|||
| lukey |
|
|||
|
I got mine of adapters and had no problems with clearance. Before I got them I was worried it would hit it but it won't, you'll see when you put them on. I'm on ultralows as well.
|
|||
| Top | |
|||
| twirqurky |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: As long as the wheels are pre au , all is fine with standard height suspension. If you get AU onward wheels , you will need 30mm adaptors for front, and 25 mm adaptors for rear. I had this problem with mine , and with lower suspension as well. whats the go with two diferent size adaptors? i just orderd a set and the bloke said nothing about thiner ones for the rear. He might not know. |
||
| Top | |
||
| millard455 |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: As long as the wheels are pre au , all is fine with standard height suspension. If you get AU onward wheels , you will need 30mm adaptors for front, and 25 mm adaptors for rear. I had this problem with mine , and with lower suspension as well. whats the go with two diferent size adaptors? i just orderd a set and the bloke said nothing about thiner ones for the rear. He might not know. or he does know and is selling me some crap that wont fit but he has sold heaps of them so hopfuly its all good
_________________ EL XR8 SERIES 2, 5SPD, HOT CHILLI RED, 200 ODD RWKW OF V8 FUN AND GAMES |
|||
| Top | |
|||
| Gaz |
|
||
|
why would you need different size adapters?
front and rear should be the same?
_________________ 2007 Steel BF Ghia MKII V8 - 19" GTP's + Superlows |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 16 guests |
