|
| ef_paddy |
|
||
|
Hey guys figured someone would have doen his but did when i've tried searching all i get is "Could not delete old search id sessions"
So i want to remove the ford, fairmont and ghia badges from the rear and the ghia badges from the side above the indicators. How are they held on? like is it just glue? or something harder than that to remove?
_________________ "You only need 2 tools, WD-40 and duct tape. If it doesnt move and it should, use WD-40. If it moves and it shouldnt, use the duct tape!" |
||
| Top | |
||
| TerroristGHIA |
|
|||
|
The side ghia badges are just double sided tape. Some of the rear badges are double sided tape, but one of them is actually held on by pins. This will then need to be filled and repainted. I just dont remember which one it was.
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| SLO247 |
|
||
|
On my EF, the falcon gli badge had pins, not sure if the ford one has as its still on. Id say the fairmont badge probably has the pins.
|
||
| Top | |
||
| BF XR |
|
||
|
the ford badge under the right hand tail light has 2 pins. i have removed the GLI from the falcons and no pins there. simply pull the gli and snap up
|
||
| Top | |
||
| ef_paddy |
|
||
|
Hmm how hard is his to fill? I have a friend who is an unqualified bt good panel beater but i've already got him spraying a few parts of th car and don't want to ask him if it's alot of work
_________________ "You only need 2 tools, WD-40 and duct tape. If it doesnt move and it should, use WD-40. If it moves and it shouldnt, use the duct tape!" |
||
| Top | |
||
| EFFII |
|
||
|
The fairmont badge has pins. i took mine off to learn that and then put ti back on. Not sure about the ford badge but the ghia on the side is just tape.
|
||
| Top | |
||
| SLO247 |
|
||
|
BF XR wrote: the ford badge under the right hand tail light has 2 pins. i have removed the GLI from the falcons and no pins there. simply pull the gli and snap up
The Gli part has no pins, but the falcon part does. |
||
| Top | |
||
| fordfreak ef |
|
|||
|
The "Fairmont" badge on the filler panel is easy to pull off.. but leaves 2 leg hole's.. that filler panel is easy to take off.. 4 phillips head screws hold it in... and then filling in the holes is a cinch!..
|
|||
| Top | |
|||
| EFFII |
|
||
|
fordfreak ef wrote: The "Fairmont" badge on the filler panel is easy to pull off.. but leaves 2 leg hole's.. that filler panel is easy to take off.. 4 phillips head screws hold it in... and then filling in the holes is a cinch!..
do you have to take the rear bar off or just tail lights to access these screws? |
||
| Top | |
||
| PIMP_LTD |
|
||
|
Thats funny, the badge on the rear of my EF mont did NOT have pins. :/
_________________ Commodore australia's favorite car??? What a load of s**t |
||
| Top | |
||
| fordfreak ef |
|
|||
|
EFFII wrote: fordfreak ef wrote: The "Fairmont" badge on the filler panel is easy to pull off.. but leaves 2 leg hole's.. that filler panel is easy to take off.. 4 phillips head screws hold it in... and then filling in the holes is a cinch!.. do you have to take the rear bar off or just tail lights to access these screws? |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 125 guests |
