|
| Crazy6ltr |
|
|||
|
Sup peaple sorry if this has been posted else were but i wanna know how to remove the colored inserts in the tail lights.Example
Attachment: Moded Back Lights.bmp [ 322.65 KiB | Viewed 2131 times ]
_________________ Car got Crushed |
|||
| Top | |
|||
| TROYMAN |
|
||
|
or like these...
Attachment: IMG_9183_web.jpg [ 70.54 KiB | Viewed 387 times ] if your inpatient dont do it because there is a large chance of damaging the lenses.. it took me about 2 hours on each light.. it involves cutting the backing away from the lenses,sometimes you can carefully lever the lens away but usually the lense will crack or break.. its best to use a thin cutting wheel on a dremel or heat up an old sharp knife with a gas torch and carefully cut between the lense and backing.. once the lense has been removed you remove the orange lense from the main lense, it might need a little light grinding on the lense edge to remove some of the factory glue..once the orange lense has been removed its just a matter of using a fine bead of sickaflex so stick the lense back on. hold it in place with tape overnight until dry and done... and then you get orange replacement globes... you can remove both the orange and red lenses if you want the full ricer look... 
|
||
| Top | |
||
| Crazy6ltr |
|
|||
|
Thaks Soooo much. You have no idea how much i want to do this
_________________ Car got Crushed |
|||
| Top | |
|||
| Crazy6ltr |
|
|||
|
HELP!!!! I just pulled the right one apart and my indicator is flashing fast and the rear one is not working
_________________ Car got Crushed |
|||
| Top | |
|||
| Crazy6ltr |
|
|||
|
HELLO Any1 please help iv'e fuked it hardcore
_________________ Car got Crushed |
|||
| Top | |
|||
| 87SIlude |
|
||
|
Probably have blown a globe.
|
||
| Top | |
||
| Crazy6ltr |
|
|||
|
hope not i've got none
_________________ Car got Crushed |
|||
| Top | |
|||
| __XR6__ |
|
||
Age: 36 Posts: 9 Joined: 12th Oct 2008 Ride: eb gli, s13 silvia sr20det Location: SA-ThA-DRiFT-StATe |
i have 2 set of lights 1 set was cracked so i broke the rest or the front off those than hacked the rear off the others and put the tow sets together i also gave the inside a light spray of niteshades look mean as.
_________________ My Toys |
||
| Top | |
||
| BF XR |
|
||
|
if its flashing fast one of the globes on that side doesnt work. you said the back one doesnt work so that would be my guess.
when changing globes try not to touch the glass with your fingers. i find they like to blow after that, dont know why that is tho |
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
TROYMAN wrote: or like these... Attachment: IMG_9183_web.jpg if your inpatient dont do it because there is a large chance of damaging the lenses.. it took me about 2 hours on each light.. it involves cutting the backing away from the lenses,sometimes you can carefully lever the lens away but usually the lense will crack or break.. its best to use a thin cutting wheel on a dremel or heat up an old sharp knife with a gas torch and carefully cut between the lense and backing.. once the lense has been removed you remove the orange lense from the main lense, it might need a little light grinding on the lense edge to remove some of the factory glue..once the orange lense has been removed its just a matter of using a fine bead of sickaflex so stick the lense back on. hold it in place with tape overnight until dry and done... and then you get orange replacement globes... you can remove both the orange and red lenses if you want the full ricer look... lol or just buy a clear set off ebay. ewww i might try this now. so the orange is just a removable lense?
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| CamFord |
|
|||
|
I wanted to do the other way (kinda). I wanted to put a red lense into my set of "altezzas". I spent three days trying to use a heat gun to get the things flexy enough to come apart. all I ended up doing was getting the s**t and destroying the casing of the passenger side one. I'm not patient enough for this s**t.
|
|||
| Top | |
|||
| EFNA |
|
|||
|
MiniSmurf wrote: I wanted to do the other way (kinda). I wanted to put a red lense into my set of "altezzas". I spent three days trying to use a heat gun to get the things flexy enough to come apart. all I ended up doing was getting the s**t and destroying the casing of the passenger side one. I'm not patient enough for this s**t. had the same idea, did some searching and turns out all the ricers are doin it with some kind of stain class window paint, same stuff as tail light tint. never tried it but from what i read could be possibility
_________________ AU FAIRMONT GHIA: 5.0 Dealer ordered SVO mods ( seeking clarification ATM), tickford suspension. |
|||
| Top | |
|||
| Crazy6ltr |
|
|||
|
Got it fixed Just flogged a bulb out my cousins VN calais
 .Aahhhhhh sooo happy. 
_________________ Car got Crushed |
|||
| Top | |
|||
| bradley4567 |
|
||
|
MiniSmurf wrote: I wanted to do the other way (kinda). I wanted to put a red lense into my set of "altezzas". I spent three days trying to use a heat gun to get the things flexy enough to come apart. all I ended up doing was getting the s**t and destroying the casing of the passenger side one. I'm not patient enough for this s**t. be patient
_________________ ef falcon daily driver |
||
| Top | |
||
| Troy |
|
||
|
yuk altezzas type light don't suit falcons
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 71 guests |
