dont know were to put this so hope this is all right. ive just finished my engine swap and manual convertion in my eb fairmont, but after convertion couple of problems.
my lights arent working, ive got park lights and high beam but no driving lights?
Also my brake lights are jammed on, i put a manual pedal box in so would the switch on the brake pedal need adjusting?
cheers jarrod

Need more info.

-What engine did you swap in
-How much loom did you play with
-How much did you undo of loom in enige bay
-Fuse box, did you touch anything, if you swapped, then what to.

This may help find a possible cause.

Also just check for loose earths, blown fuses etc, if you haven't already done


Andrew

thanks for the reply Will check for loose earths 2moro.
I put a ed falcon motor in it with less kays on it. didnt touch loom by lights, just all the plugs on the motor as i put the manual ecu in it and no didnt touch the fuse box.

cheers jarrod

Then it sounds like it could be just a simple earth prob, or fuse blown. Check these.

Andrew