|
| newby |
|
|||||||
|
G'day all,
The bonnet has a firbe glass bulge bought off ebay and fitted in Dandenong, the small scoop is functional with a hole cut in the bonnet above the airbox. The scoop is no longer available- I bought secondhand from here. As advised by others here I only changed over the centre of the handles with the chrome bits, by memory 2 doors were very easy and 2 very hard. Too much effort- luckily I didn't know what I was getting myself into Pics taken at night that way you can't see the dirt! 
_________________ Don't bug me unless you have chocolate or a cure for PMT Last edited by newby on Sun Mar 23, 2008 11:50 pm, edited 1 time in total. |
|||||||
| Top | |
|||||||
| DoddEA |
|
||
|
Looks good!
Should match the "functional" air hole with another "Non functional" on the otherside... but i like symmetry lol |
||
| Top | |
||
| newby |
|
|||||
|
cheers DoddEA,
heres another pic
_________________ Don't bug me unless you have chocolate or a cure for PMT |
|||||
| Top | |
|||||
| 02tonna |
|
|||
|
the bonnet bulge looks mint.. makes a big differance
_________________ 02 BA Fairmont Ghia-- 24v 5.4L, Dumped, 18' Advanti's, Cold Air, 20% Tint |
|||
| Top | |
|||
| badkiwi |
|
|||
|
i had the same idea abt scoop i still wana try with pipe streight in to air box, looks good too, how was the air directed into air box
|
|||
| Top | |
|||
| phongus |
|
|||
|
I like the bulge, but not so much the scoop. Each to their own.
If you don't mind me asking, how much did the bulge set you back including the labour? phong =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| BuNtEr |
|
||
|
i like the door handles done in chrome as i been toying with the same idea, what it cost you to get them chromed ?
_________________ BANNED |
||
| Top | |
||
| newby |
|
|||
|
phongus wrote: I like the bulge, but not so much the scoop. Each to their own.
If you don't mind me asking, how much did the bulge set you back including the labour? phong =P~ Had it done in one hit, fitting $600, bulge $150, scoop $150 and it took a week the fibreglass flexed so i do have a small crack that will be fixed for free soon Good value overall not perfect as you can see the join close up- would recommend steel plastic is really hard to chrome..... its about 98% of what i hoped for, from a distance it gives blury reflections its done with vacuum metalising which contains aluminium, too light in colour so theres a clear with a 5% tint over the top
_________________ Don't bug me unless you have chocolate or a cure for PMT |
|||
| Top | |
|||
| newby |
|
|||
|
BuNtEr wrote: i like the door handles done in chrome as i been toying with the same idea, what it cost you to get them chromed ?
Its done in bunch lots, so for more than just the handles its $100 and $50 for the clear tint. I got quoted $160 for a whole dash and then I came to my senses!!! sent them by mail so that cost $16. had to wait about 2mths until they had enough to do to turn the machine on
_________________ Don't bug me unless you have chocolate or a cure for PMT |
|||
| Top | |
|||
| BuNtEr |
|
||
|
newby wrote: BuNtEr wrote: i like the door handles done in chrome as i been toying with the same idea, what it cost you to get them chromed ? Its done in bunch lots, so for more than just the handles its $100 and $50 for the clear tint. I got quoted $160 for a whole dash and then I came to my senses!!! sent them by mail so that cost $16. had to wait about 2mths until they had enough to do to turn the machine on ok thanks i like the look it gives it that elegant look about it
_________________ BANNED |
||
| Top | |
||
| phongus |
|
|||
|
newby wrote: phongus wrote: I like the bulge, but not so much the scoop. Each to their own. If you don't mind me asking, how much did the bulge set you back including the labour? phong =P~ Had it done in one hit, fitting $600, bulge $150, scoop $150 and it took a week the fibreglass flexed so i do have a small crack that will be fixed for free soon Good value overall not perfect as you can see the join close up- would recommend steel plastic is really hard to chrome..... its about 98% of what i hoped for, from a distance it gives blury reflections its done with vacuum metalising which contains aluminium, too light in colour so theres a clear with a 5% tint over the top Cheers. I was told cracking might happen with fibre glass...but sorting out a cheap metal bulge is hard and exxy. phong =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| newby |
|
|||
|
badkiwi wrote: i had the same idea abt scoop i still wana try with pipe streight in to air box, looks good too, how was the air directed into air box
at the moment the airbox lid has a hole in it which can't be seen when the bonnet is down, the hole can defeat the airbox purpose of keeping away hot engine air from the pod filter, really like the idea of a pipe but concerned that too much crap will get in having such a 'direct' opening
_________________ Don't bug me unless you have chocolate or a cure for PMT |
|||
| Top | |
|||
| BuNtEr |
|
||
|
on the under side of the custom are intake vent use some alloy mesh that will stop s**t getting in the intake.
simple 10 min job also cheap.
_________________ BANNED |
||
| Top | |
||
| badkiwi |
|
|||
|
any idea where i can get scoop like that , all the ones ive been lookin at are way big
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 35 guests |
