|
| Sandstone_EB_Fairmont |
|
|||
|
ahk, i thought you had an xr lol. but the areas that youve circled is where it bolts to the car. Im unsure of the grille area though. the parts that youve circled has a horizontal bolt that monts it to the car under the indicator area (there should be a hole there about 6-8mm wide). for this one you mount the bumper and mark through that hole onto the bumper then remove bumper and drill the hole and try to fit the biggest thread diameter bolt possible (I think my holes are 10mm now).
The other mount is normally a screw through the bumper into the guard. I measured the distance of where this hole was from my old bumper and then drilled in the same spot on the new one and fitted a bolt instead of the screw. My new bar also had two other mounts that protruded back to the radiator panel either side of the grille so to speak. Not being there to see how yours is made, I just suggest find a way to mount the top part (where the grille would normally be) to the support panel there, under the plastic trim  Thats alot of writing lol but its the best I can do I rekon, all else fails just get the crash repairers figure out whats best. Should look killa on the ute when painted;)
_________________ -1994 EF XR6 + Factory 5speed = Fun |
|||
| Top | |
|||
| big dell |
|
||
|
OK have another question how does one put the fog light covers on?
|
||
| Top | |
||
| Sandstone_EB_Fairmont |
|
|||
|
haha thought you'd ask. The crash repairers fitted mine. they used one screw in each, on the outer part and Sikaflex on the inner parts, where those two steps are.
_________________ -1994 EF XR6 + Factory 5speed = Fun |
|||
| Top | |
|||
| big dell |
|
||
|
thank you very much.
|
||
| Top | |
||
| Sandstone_EB_Fairmont |
|
|||
|
thats ok, just make sure to post up pictures when done
_________________ -1994 EF XR6 + Factory 5speed = Fun |
|||
| Top | |
|||
| big dell |
|
||
|
Yeah i should have gotten pics before it got dark but didn't.
The bumper looks mad. But its not that good as its stock ride hight at the moment. and i wont be able to get any tomorrow. Get some more up of your as that paint is god. |
||
| Top | |
||
| A-Bone |
|
|||
|
Sandstone your ride is off tap mate... love that look
and big dell make sure you get some pics up soon im dying to see how this comes up, I've been thinking of doing this mod for a longgg time. where can i get 1 of those front bars for my XH? Cheers boys 
_________________ 98 XH 5 Speed |
|||
| Top | |
|||
| Sandstone_EB_Fairmont |
|
|||
|
A-bone. ebay 'ef typhoon body kit'. username phatcustoms. pm them and ask for just the front to suit xh
heres some better pics  
_________________ -1994 EF XR6 + Factory 5speed = Fun |
|||
| Top | |
|||
| A-Bone |
|
|||
|
omg that is fu(kin DOPE!
i love the shape of the typhoon kit, what's a rough price for paint on front bar???
_________________ 98 XH 5 Speed |
|||
| Top | |
|||
| Sandstone_EB_Fairmont |
|
|||
|
Cheers for the compliment
I need to lower the front more now lolExpect around $900 or so. Probly so much due to the two tone and one colour being the colour changing cobalt. but that price was fitted too.
_________________ -1994 EF XR6 + Factory 5speed = Fun |
|||
| Top | |
|||
| A-Bone |
|
|||
|
ughh that seems alright, my beater is taking out some rust in the door foot pan area and painting up the door repairs soon as well as touching up the back of my ute (hit the f**k gate the other morning)
 So ill just get him to fix this up i think, might get a Boss hood bulge too. **just go all out**  Send them a PM, did yo just get the front bar?
_________________ 98 XH 5 Speed |
|||
| Top | |
|||
| big dell |
|
||
|
i got my bar off PCK's and the fit wasn't to good so it cost a bit more to fit but was much cheaper then the other kits that i found.
mine was around $800 all up fitted and such but they still had some silver mixed from when the sides of my ute where smoothed. it was $350 just for the bar. |
||
| Top | |
||
| Sandstone_EB_Fairmont |
|
|||
|
ah spewing, stupid gates. the ba buldges look killer on e-series
yea pm them and ask for a quote for just the front bar, otherwise you'll pay and get the whole kit. make sure to specify whether xr or not and ef or el. and hurry up and get pics up already lol
_________________ -1994 EF XR6 + Factory 5speed = Fun |
|||
| Top | |
|||
| big dell |
|
||
|
This is how it is at the moment im not to happy with the car as a whole but yeah.
Still got to lower it, put my black side repeaters and finish cleaning the sides. Oh and put a ford badge on that i cant find. 
|
||
| Top | |
||
| Sandstone_EB_Fairmont |
|
|||
|
that looks awesome. definitely needs lowering lol. came up great
_________________ -1994 EF XR6 + Factory 5speed = Fun |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 73 guests |
