|
| Turbo Jimmy |
|
|||
|
I will be keen again dependant on cost but it sounds good
_________________ BFII XR6T - Conquer - K&N Pod Filter - Baby seat and Elmo sun shades!!! |
|||
| Top | |
|||
| SIM |
|
|||
|
Interested
_________________ RIP Scotty |
|||
| Top | |
|||
| Chargd |
|
|||
|
yes fpr ef falcon
_________________ 95 Ef Gli, mods : Tickford Head, Tickford ecu, Pacemaker 4499, Venom 100 cpi cat, Redback 2.5" catback, Wade 977b cam, ba xr6 intake and SS inductions, k & n filter & leather seats. 147.5kw @ wheels |
|||
| Top | |
|||
| MAD |
|
|||
|
{USERNAME} wrote: i will be up for it. depending on cost of course. will it just be the cover, or the lens as well? What do you mean by cover or lens? Wow, there's a lot more interest than I had expected. At this stage the price looks like it will be $100/pair, but I'm hoping I might be able to bring that down a little. I should be able to start actually playing with these in the next few weeks and see if a good finish is achievable. I'll keep this updated as I progress. |
|||
| Top | |
|||
| Benjii |
|
||
|
Keen for a set for an EF GLi
|
||
| Top | |
||
| jaensch11 |
|
||
|
Sorry. It was a bit cryptic. Is it just the clear plastic or are you selling complete sets with the clear lens
|
||
| Top | |
||
| MAD |
|
|||
|
{USERNAME} wrote: Sorry. It was a bit cryptic. Is it just the clear plastic or are you selling complete sets with the clear lens I could do a completed set of lights too I guess. |
|||
| Top | |
|||
| SIM |
|
|||
|
Keen az
Not a bad price either i thought.
_________________ RIP Scotty |
|||
| Top | |
|||
| jaensch11 |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: Sorry. It was a bit cryptic. Is it just the clear plastic or are you selling complete sets with the clear lens I could do a completed set of lights too I guess. It doesn't bother me either way. I was just looking st doing a hid conversion but wanted to keep the originals. But I can get some at the wreckers if it is too mush of a hassle. |
||
| Top | |
||
| MAD |
|
|||
|
Oh. I thought you meant a complete modded headlight including HID projectors fitted.
It would probably be easier for you to get a second hand set rather than me try to source them as well. |
|||
| Top | |
|||
| DOHCED |
|
|||
|
interested here for EF Fairmont!
_________________ XG Ute - 3 Seater - Auto - Dual Fuel |
|||
| Top | |
|||
| jaensch11 |
|
||
|
would the new material be more heat resistant than the original plastic?
does it yellow? im not to sure about this stuff, but at such a cheepish cost i would get them anyway. |
||
| Top | |
||
| rustyeb1991 |
|
||
|
interested for eb
|
||
| Top | |
||
| MAD |
|
|||
|
{USERNAME} wrote: would the new material be more heat resistant than the original plastic? does it yellow? im not to sure about this stuff, but at such a cheepish cost i would get them anyway. The new material is basically going to be the same as what headlight protectors are made from. If you're asking about heat in regard to running hotter bulbs, the problem doesnt lie with the lenses, its the reflectors that get damaged by the heat. Otherwise, they will be equally as good as standard. Something I've realised is that the lenses will need to be attached with a different adhesive as the standard set up uses clips to hold the lens in place, I think if you were to use the sealant only they would probably fall off on a hot summers day. I've found another sealant that will work but it will add a little to the cost to supply it with the lenses. You could use silicone but some release fumes when they cure and that could fog the lenses on the inside. |
|||
| Top | |
|||
| V8R |
|
||
|
would be interested in a set for ef gli for around that money...
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 54 guests |
