Fordmods Logo

Exhaust? 

 

Page 1 of 3 [ 35 posts ] Go to page 1, 2, 3  Next

 
 Post subject: Exhaust?
Posted: Thu Oct 06, 2005 11:00 am 
Fordmods Newbie
Offline

Posts: 6

Joined: 4th Oct 2005

Ride: 1992 EB

Location: Bendigo
VIC, Australia

hey champs,
i was just wondering what size of a exhaust would be good for a strait 6, and i want it to sound good as and stuff.
and how many peices need to be altered? like 1st peice? 2nd peice or 3rd? or all...
iv got no idea so please help
Top
 Profile  
 
 
Posted: Thu Oct 06, 2005 11:13 am 
Getting Side Ways
Offline
User avatar

Posts: 873

Joined: 9th May 2005

Ride: BA XR6T

2 1/2" with a straight through muffler, u may want a resinator where the rear muffler used to go, depends how loud u want it....

 

_________________

300+rwkw HeadsexTuned XR6 Turbo Ute *NOW SOLD :(*
MK Triton with 31" muddies, 2" lift and 3" turbo back exhaust etc...

Top
 Profile  
 
 
Posted: Thu Oct 06, 2005 11:18 am 
Fordmods Newbie
Offline

Posts: 6

Joined: 4th Oct 2005

Ride: 1992 EB

Location: Bendigo
VIC, Australia

ok so if i was to go to a exhuast joint, and say that i want a 2 1/2" strait through exhaust what does that mean? and how load is it going to be? and how much is it likely to cost?
Top
 Profile  
 
 
Posted: Thu Oct 06, 2005 11:28 am 
Getting Side Ways
Offline
User avatar

Posts: 873

Joined: 9th May 2005

Ride: BA XR6T

Pinky wrote:
ok so if i was to go to a exhuast joint, and say that i want a 2 1/2" strait through exhaust what does that mean? and how load is it going to be? and how much is it likely to cost?

tell them u want a "cat back 2 1/2" exhaust, with a straight through muffler" if u decide its to loud u can always add the resinator after, should cost about $250

 

_________________

300+rwkw HeadsexTuned XR6 Turbo Ute *NOW SOLD :(*
MK Triton with 31" muddies, 2" lift and 3" turbo back exhaust etc...

Top
 Profile  
 
 
Posted: Thu Oct 06, 2005 11:51 am 
Fordmods Newbie
Offline

Posts: 6

Joined: 4th Oct 2005

Ride: 1992 EB

Location: Bendigo
VIC, Australia

yea that sounds cheap as, but what will the tip look like? or will i just hav to buy one and weld it on?
what is a cat back 2 1/2"??? explain please?
Top
 Profile  
 
 
Posted: Thu Oct 06, 2005 2:40 pm 
Getting Side Ways
Offline
User avatar

Posts: 873

Joined: 9th May 2005

Ride: BA XR6T

Pinky wrote:
yea that sounds cheap as, but what will the tip look like? or will i just hav to buy one and weld it on?
what is a cat back 2 1/2"??? explain please?


the term "cat back" means they replace the exhaust from the catalytic converter to the tip. (i.e. does not include extractors and catalytic converter) the tip will look like whichever one u choose to put on, they will fit it on for u, it may cost extra for the tip, but some exhaust places throw in a tip if u buy an exhaust off them. u can choose anything from an oval tip to twin tips, have a look around, u will see some photos on here of different cars with different tips, u can make your mind up from there :)

 

_________________

300+rwkw HeadsexTuned XR6 Turbo Ute *NOW SOLD :(*
MK Triton with 31" muddies, 2" lift and 3" turbo back exhaust etc...

Top
 Profile  
 
 
Posted: Fri Oct 07, 2005 2:08 am 
Smokin em up
Offline
User avatar

Age: 41

Posts: 274

Joined: 29th Nov 2004

Gallery: 20 images

Ride: 03 Fairmont Ghia

Location: Perth
WA, Australia

TY Mr Man, I had the same question as Pinky, am hitting the exhaust shops tomorrow.
Am a big fan of the quad tip look on some GTP's and I want to do it to my Au, but the tip style I want is the same as the TS50 style one sticks out further then the other, any idea what the tips/style is called if I were to ask for it from the shop?.

Thanks :)

 

_________________

2003 BA Fairmont Ghia V8 www.bseries.com.au/acey xr8 catback
Image

Top
 Profile  
 
 
 Post subject: Re: Exhaust?
Posted: Fri Oct 07, 2005 2:22 am 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 4946

Joined: 15th Nov 2004

Gallery: 2 images

Ride: Trik'd up EFII XR6

Location: Perth
WA, Australia

Pinky wrote:
hey champs,
i was just wondering what size of a exhaust would be good for a strait 6, and i want it to sound good as and stuff.
and how many peices need to be altered? like 1st peice? 2nd peice or 3rd? or all...
iv got no idea so please help


What sorta of straight siz are we talking about.....

Cat back 2.5 will sound nice and wont cost the world ifu already have a 2.5" straight thru have the rear muffler removed if u want extra noise :P

 

_________________

For Sale: 25 Farad Rockford Fosgate Competition Series Carbon Cap, more to come - pm me if interested

Top
 Profile  
 
 
Posted: Fri Oct 07, 2005 3:49 am 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 927

Joined: 6th Nov 2004

Ride: BA Falcon EGas

Location: Perth
WA, Australia

I recommend Lukey mufflers but I've heard good things bout Redback mufflers too.

Make sure its a MANDREL BENT SYSTEM, not press bent.

 

_________________

BA Falcon Futura on EGas. Stock as...

EF 5 speed manual; PH 4480 Pacemaker Headers; 2 1/2" Lukey Mandrel Bent System; Hi Flow Walker Cat; Stage 3 Crow Cam; ChipTorque Chip; 3" Mandrel Bent Intake; K&N Pod Filter; Low Pedders Suspension; 17" EL GT Champagne Rims; RPM Series Clutch

Top
 Profile  
 
 
Posted: Fri Oct 07, 2005 11:08 am 
Getting Side Ways
Offline
User avatar

Posts: 873

Joined: 9th May 2005

Ride: BA XR6T

MilleniumFalcon wrote:
TY Mr Man, I had the same question as Pinky, am hitting the exhaust shops tomorrow.
Am a big fan of the quad tip look on some GTP's and I want to do it to my Au, but the tip style I want is the same as the TS50 style one sticks out further then the other, any idea what the tips/style is called if I were to ask for it from the shop?.

Thanks :)


just tell them u want the tips like the TS50, they should be able to fit one for ya, from what u decribed, sounds like angled twin tips :D

and as smackdown said, make sure its mandrel bent :)

 

_________________

300+rwkw HeadsexTuned XR6 Turbo Ute *NOW SOLD :(*
MK Triton with 31" muddies, 2" lift and 3" turbo back exhaust etc...

Top
 Profile  
 
 
Posted: Fri Oct 07, 2005 9:17 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 2754

Joined: 14th Apr 2005

Ride: fairmont

Location: mackay
QLD, Australia

i got a lukey 2.5inch straight thru for $279 at dynoflo it has one huge muffler box

 

_________________

Now i have a EF XR8 5spd.........mmmmmm 5L

Top
 Profile  
 
 
Posted: Sat Oct 08, 2005 1:07 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 607

Joined: 15th Dec 2004

Gallery: 23 images

Ride: GLXR 6

Location: Perth
WA, Australia

Would it cost extra for bigger muffler boxes? and would it make any difference in the performance/sound of the car if you put more mufflers on? One more thing, does it cost any extra for mandrel bent?

I remember on my VL, i had a 2.5" but it wasnt mandrel bent. Everytime i went to throw it into 2nd when slowing down, the exhaust will make a loud reving sound. Do the mandrel bents do the same thing? I dont really mind about that particular sound, just wanted to know :)
cheers :)

 

_________________

Image

Top
 Profile  
 
 
Posted: Sat Oct 08, 2005 1:59 pm 
Getting Side Ways
Offline
User avatar

Posts: 873

Joined: 9th May 2005

Ride: BA XR6T

doofus wrote:
Would it cost extra for bigger muffler boxes? and would it make any difference in the performance/sound of the car if you put more mufflers on? One more thing, does it cost any extra for mandrel bent?

I remember on my VL, i had a 2.5" but it wasnt mandrel bent. Everytime i went to throw it into 2nd when slowing down, the exhaust will make a loud reving sound. Do the mandrel bents do the same thing? I dont really mind about that particular sound, just wanted to know :)
cheers :)


more mufflers = less noise, if u worried about it being loud, if u order a red back system for example, u can ask for a tailpipe with or without a resinator.
the bolt on systems u buy for around the $250 mark are usually mandrel bent, just tell the shop u want a mandrel bent one.
and that revving sound u describe, sounds like engine braking to me :) and if u do it the falcon, it will still do it :)

 

_________________

300+rwkw HeadsexTuned XR6 Turbo Ute *NOW SOLD :(*
MK Triton with 31" muddies, 2" lift and 3" turbo back exhaust etc...

Top
 Profile  
 
 
Posted: Sat Oct 08, 2005 2:38 pm 
Getting Side Ways
Offline
User avatar

Posts: 448

Joined: 11th Sep 2005

Gallery: 1 images

Ride: Fairmont

Location: Werribee
VIC, Australia

How much more performance do u get out of exhause system, is it noticeable? I have a 6cyl EL Faairmont.
Top
 Profile  
 
 
Posted: Sat Oct 08, 2005 4:02 pm 
Getting Side Ways
Offline
User avatar

Posts: 873

Joined: 9th May 2005

Ride: BA XR6T

u wont notice much unless u get extractors as well, a cat back is mostly for sound :)

 

_________________

300+rwkw HeadsexTuned XR6 Turbo Ute *NOW SOLD :(*
MK Triton with 31" muddies, 2" lift and 3" turbo back exhaust etc...

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 3  [ 35 posts ]  Go to page 1, 2, 3  Next

Who is online

Users browsing this forum: No registered users and 65 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sun Nov 17, 2024 9:55 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names