|
| TROYMAN |
|
||
|
hi guys..
after some input on what would get superglue of paintwork. I decided to remove the silver strip off the door of the au as they were starting to lift, but it seems someone has used super glue in 2 spots. so far ive tried turps and thinners. im thinking there is no hope. suggestions ?????? |
||
| Top | |
||
| Matt_jew |
|
||
|
Caramel wheel maybe..............
_________________ xr6turnip wrote: More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around! |
||
| Top | |
||
| ranga83 |
|
||
|
something like this should work, should be able to find it a hobby shops etc http://www.ebay.com.au/itm/Everbuild-Su ... 51af6b6022
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| Gab1 |
|
|||
|
Someone used it to hold some badges onto my car - I had to SCRAPE it off with a screwdriver, sand, and re paint the area unfortunately.
Gab |
|||
| Top | |
|||
| SWC |
|
||
|
Acetone (Nail Polish Remover) will remove superglue, also available at Chemists, but check it on some "safe paintwork" to ensure it won't strip the paint.
|
||
| Top | |
||
| mitchell g |
|
||
|
i've used a stanly knife on it's own, it didn't scratch my paint up and got it all off for me
|
||
| Top | |
||
| snap0964 |
|
|||
|
http://www.bunnings.com.au/loctite-5g-s ... 0_p1210072
I have some of this and it does work well - does say though not to use on painted surfaces. Caramel wheel as above might be your best option - Vgautopaints do have them.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| TROYMAN |
|
||
|
thanks for the tips guys. ill see how I go.. but unless I can dissolve the glue I don't think its coming off, it looks like it has etched or bonded into the paint..
either way its only 2 small spots about 5mm x 20mm, worse case is sand and touch it up... this is what I got. its on both front doors. 
|
||
| Top | |
||
| ranga83 |
|
||
|
i also read somewhere that turbine oil will get it off without hurting paint
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| TROYMAN |
|
||
|
and the winner is... acetone..
it took a while for it to break the glue down and it didn't damage the paint, it seemed to soften the paint surface but not enough to remove or damage it.. unfortunately me scratching at it yesterday had scratched the paint slightly so a light touch up and all is good enough.. after taking glue off  touched up. 
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 2 guests |
