|
shoey50 |
|
||
|
hey guys just wondering where you can get the inverted ef/el xr bonnet vents (its sticks up like a scoop) from i know they where sold on this site a while back but i cant find a link anymore any help would be great thanks
|
||
Top | |
Gaz |
|
||
|
sorry to but in...
but are their any legalities with fitting bonnet vents (such as copys of the ef xr ones) to a fairmont say? and how hard is it to do?
_________________ 2007 Steel BF Ghia MKII V8 - 19" GTP's + Superlows |
||
Top | |
twr7cx |
|
|||
|
{USERNAME} wrote: sorry to but in...
but are their any legalities with fitting bonnet vents (such as copys of the ef xr ones) to a fairmont say? and how hard is it to do? If it's just the stick on ones then no shouldn't be any problems. If it's the genuine ones when you have to cut out, a cop might claim the bonnet is structe integrity or something and require an engineers certificate if there being a C***. But they shouoldn't as XR6's came otu with them and that. there's also rules about the bonnet, e.g. you can fit some massively tall vents that block off your vision and that i think there's a guy on Fordforums.com or FordForums.com.au that sells the sesquential scoops. |
|||
Top | |
znipa-x |
|
|||
|
I picked up a set of the XR8 ones a while back, but from what I see I can't put them into my stock GLi bonnet, the XR bunnets look like they have a recess that the vents drop into, not just a hole cut out
_________________ former FORD V8 owner
|
|||
Top | |
JOSE |
|
|||
|
thats the way they are supposed to be fitted, but a lot of cars with them fitted (non original) just have a hole cut in the bonnet,
The cop wouldnt get very far with the bonnet being of structural importance bit..
_________________ Because i can. |
|||
Top | |
Waggin |
|
|||
|
{USERNAME} wrote: hey guys just wondering where you can get the inverted ef/el xr bonnet vents (its sticks up like a scoop) from i know they where sold on this site a while back but i cant find a link anymore any help would be great thanks
Hi, Sounds like you're after the Sequential Scoop. Im not sure if theyre still being produced, might just have to keep an eye open for one being sold 2nd hand
_________________ WAG363: AUII LTD Supercharged 363 Dart Stroker [{DESCRIPTION}] |
|||
Top | |
shoey50 |
|
||
|
yeah the sequential scoops sorry thats not good if they arnt being produced anymore anyone wanna sell one then
|
||
Top | |
znipa-x |
|
|||
|
{USERNAME} wrote: thats the way they are supposed to be fitted, but a lot of cars with them fitted (non original) just have a hole cut in the bonnet,
The cop wouldnt get very far with the bonnet being of structural importance bit.. wouldn't it look messy, and how can they be anchored in, from what i've seen the XR bonnets have like a pressed recess and the vent sits in that and is bolted through, I haven't been able to see the underside of a bonnet to confirm exaclty how they are anchored though, so it's a guess, can someone take a photo of there XR bonnet to show. these are mine, I may be selling them, unless anybody can give me a simple way to install and look neat on a stock GLi bonnet.
_________________ former FORD V8 owner
|
|||
Top | |
Rapier |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: thats the way they are supposed to be fitted, but a lot of cars with them fitted (non original) just have a hole cut in the bonnet, The cop wouldnt get very far with the bonnet being of structural importance bit.. wouldn't it look messy, and how can they be anchored in, from what i've seen the XR bonnets have like a pressed recess and the vent sits in that and is bolted through, I haven't been able to see the underside of a bonnet to confirm exaclty how they are anchored though, so it's a guess, can someone take a photo of there XR bonnet to show. these are mine, I may be selling them, unless anybody can give me a simple way to install and look neat on a stock GLi bonnet. how much u want for em |
||
Top | |
shoey50 |
|
||
|
thats another good question can they be put on gli bonnets?? i guess no one can located them either?
|
||
Top | |
AKO |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: thats the way they are supposed to be fitted, but a lot of cars with them fitted (non original) just have a hole cut in the bonnet, The cop wouldnt get very far with the bonnet being of structural importance bit.. wouldn't it look messy, and how can they be anchored in, from what i've seen the XR bonnets have like a pressed recess and the vent sits in that and is bolted through, I haven't been able to see the underside of a bonnet to confirm exaclty how they are anchored though, so it's a guess, can someone take a photo of there XR bonnet to show. these are mine, I may be selling them, unless anybody can give me a simple way to install and look neat on a stock GLi bonnet. how much u want for em
_________________ The artist formerly known as seton005 (and allegedly The_Murph).
|
|||
Top | |
shoey50 |
|
||
|
how much?
|
||
Top | |
Rapier |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: thats the way they are supposed to be fitted, but a lot of cars with them fitted (non original) just have a hole cut in the bonnet, The cop wouldnt get very far with the bonnet being of structural importance bit.. wouldn't it look messy, and how can they be anchored in, from what i've seen the XR bonnets have like a pressed recess and the vent sits in that and is bolted through, I haven't been able to see the underside of a bonnet to confirm exaclty how they are anchored though, so it's a guess, can someone take a photo of there XR bonnet to show. these are mine, I may be selling them, unless anybody can give me a simple way to install and look neat on a stock GLi bonnet. how much u want for em do either of you have the inners as well or are they just the vents? |
||
Top | |
znipa-x |
|
|||
|
{USERNAME} wrote: do either of you have the inners as well or are they just the vents?
mine are sitting in the inners in the photo
_________________ former FORD V8 owner
|
|||
Top | |
Rapier |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: do either of you have the inners as well or are they just the vents? mine are sitting in the inners in the photo ah right if your gonna sell them how much you want for them?? |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 46 guests |