|
ReGiE |
|
|||
|
they are a 2 stage kinda light. one dim and one bright. but its not that noticable.
_________________ Gooooone - Eb2 Coon - 143RWKW |
|||
Top | |
mavs19 |
|
|||
|
ReGIE,
Just so you know, we spent almost $3000 on buying LED junk from all corners of the planet. Spent almost 3 month playing around with them in all kid of conditions. Only a handful of them were OK and could 'almost' pass. Rest are probably a backyard operation of Mum, Dad and all the Kids, their respective partners, grand children and all the neighbourhood children sitting in a shed soldering these LEDs. Being paid few measly cents for a days work. That is probably why they are so cheap. Well actually they are not, since both the importer and retailer are making a handsome profit on selling them to public. But as I mentioned earlier just wait a little longer and there are some real good stuff in the pipelines that will soon hit the market. For those who can’t wait any longer and MUST have it NOW, then resort to the method used by get EFd , also known as getFEd Method. (Glue Tag/chewing gum etc....)
_________________
|
|||
Top | |
mavs19 |
|
|||
|
ReGIE,
Just so you know, we spent almost $3000 on buying LED junk from all corners of the planet. Spent almost 3 month playing around with them in all kid of conditions. Only a handful of them were OK and could 'almost' pass. Rest are probably a backyard operation of Mum, Dad and all the Kids, their respective partners, grand children and all the neighbourhood children sitting in a shed soldering these LEDs. Being paid few measly cents for a days work. That is probably why they are so cheap. Well actually they are not, since both the importer and retailer are making a handsome profit on selling them to public. But as I mentioned earlier just wait a little longer and there are some real good stuff in the pipelines that will soon hit the market. For those who can’t wait any longer and MUST have it NOW, then resort to the method used by get EFd , also known as getFEd Method. (Glue Tag/chewing gum etc....)
_________________
|
|||
Top | |
get EFd |
|
||
|
Mavs i agree what u say bout LED tail lights.But in my defence mine r great in both night and day.I even swapped cars with my mate to see for myself how they faired verses standard globes.The LED produced a more intence light (as u know)and wasnt a problem viewing from angles.BUT...anything more than viewing from 45deg the light starts to fade.
P.S The get EFd method (i like it) CHEERS |
||
Top | |
twr7cx |
|
|||
|
would it be better to fit clear or coloured globes in?
In my EF's front indicators they are clear so obviously will have to fit yellow LED globes. But the rear indicators and taillights the plastic is coloured, so do I fit coloured globes or is better to fit clear globes in there? |
|||
Top | |
get EFd |
|
||
|
Ive got red.seems to be ok.
|
||
Top | |
mavs19 |
|
|||
|
{USERNAME} wrote: would it be better to fit clear or coloured globes in?
In my EF's front indicators they are clear so obviously will have to fit yellow LED globes. But the rear indicators and taillights the plastic is coloured, so do I fit coloured globes or is better to fit clear globes in there? Obvously clear ones would be more visible behind a colourd lens. I am not against LEDs, No no no, it is just that the stuff sold on the market today have few major flaws that still need to be wrangled out before they can be used for one of the most important safety features of a vehicle. Visibility on the road. Those of you who have LED bulbs, try to replace the LEDs with stronger ones and try to bend and spread them so they form a sphere.
_________________
|
|||
Top | |
fordman351 |
|
|||
|
{USERNAME} wrote: Yeah a dimmer inserted in the parker circuit would be helpful there that way when u brake people can actually tell rather than looking for other taillights to suddenly come on
Big Kev, i read on the LED website that low voltage is the big killer for LED's (aparantly). How would we overcome this? |
|||
Top | |
unclewoja |
|
||
|
{USERNAME} wrote: In order to make a difference, i.e. such as in the case of LED’s used as OEM , bearing in mind that they have used a different and far better type of reflectors in their head/tail light assys., you need to use, say LED’s with 8-9000mcd.
So unless you are prepare to buy one of these sets and spend some time and a bit more money to replace the LED’s to higher mcd. Just wait and see if they introduce something better, worth spending your money on. You never know what is around the corner. However, as we all know LED’s last much longer, use less power, develop less heat which are the only plus we could give these aftermarket LED replacement bulbs, presently available.... Can't have been too much research in your 'survey'. I have two problems with your post. 1. Post the results. 2. The hyperbright LED brake lights {DESCRIPTION} have 9680mcd LEDs in them and they've been on the market for almost a year now. |
||
Top | |
unclewoja |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: would it be better to fit clear or coloured globes in? In my EF's front indicators they are clear so obviously will have to fit yellow LED globes. But the rear indicators and taillights the plastic is coloured, so do I fit coloured globes or is better to fit clear globes in there? Obvously clear ones would be more visible behind a colourd lens. I am not against LEDs, No no no, it is just that the stuff sold on the market today have few major flaws that still need to be wrangled out before they can be used for one of the most important safety features of a vehicle. Visibility on the road. Those of you who have LED bulbs, try to replace the LEDs with stronger ones and try to bend and spread them so they form a sphere. Clear ones are not more visible. The white LEDs put out the entire spectrum of visible light only so that the lens cuts out 90% of the light and only gives you the red portion of the light. The coloured LEDs give you the spectrum you need so that next to none of the light output is filtered out by the lens. If you want a sphere LED, then use {DESCRIPTION} only avaible in white though, if it will fit behind the lens. Again, I have serious doubts about the extent of your research. It seems like you've just gone to Repco, AutoBarn, Super Cheap and Bursons and got what they had. |
||
Top | |
blackjack_original |
|
||
Posts: 3516 Joined: 8th Nov 2004 |
[self-deleted]
Last edited by blackjack_original on Sat Jun 07, 2014 12:56 am, edited 1 time in total. |
||
Top | |
XR9UTE |
|
||
|
Ok any news on good LED bulbs? Surely there are good ones available now? Like these maybe?
|
||
Top | |
my671fordv8 |
|
|||||||
|
I made my own set of led taillights for a 37 ford they run 4 each of luxeon red, amber and white leds for them the luxeon leds are the same that they use in daytime running lights and have a much higher output . I have to modify them with a reflector cause i forgot to put one in ut 4 of these leds put out more light than the standard globe in my opinion i wouldnt mind having them tested to prove it but they are far from cheap . the leds are about $2 to 10 each $20 if you get them from jaycar and then you need a driver $7 to $20 for every 4 leds
|
|||||||
Top | |
XR9UTE |
|
||
|
Cheers bloke, Yes I now about the Luxeon LEDS but I'm after more of an off-the-shelf item in this case.
Just wondered if they have perfected them yet? They should have by now I would have thought? |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 26 guests |