Fordmods Logo

LED Taillights? 

 

Page 1 of 1 [ 8 posts ] 

 
 Post subject: LED Taillights?
Posted: Sat Feb 09, 2008 12:14 am 
Technical Contributor
Offline
User avatar

Age: 37

Posts: 963

Joined: 8th Nov 2004

Gallery: 4 images

Ride: Liberty MY04 4GEN Luxury

Location: Melbourne
VIC, Australia

Hey guys I was just wondering if something like this would fit into the EF/EL taillights?

http://cgi.ebay.com.au/2-x-24-LED-Red-C ... dZViewItem

Would be great for a brighter brake light with the clear taillights or otherwise.

Thanks,
Luke.

 

_________________

www.lukehimself.net

Top
 Profile  
 
 
Posted: Sat Feb 09, 2008 12:38 am 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

cant see why it would not fit,
as long as it is 12volt and runs 2 sets of LED's

and fits teh bulb holders which it should

 

_________________

RIP SCOTT

Top
 Profile  
 
 
Posted: Sat Feb 09, 2008 7:24 am 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 3277

Joined: 5th Nov 2004

Gallery: 36 images

Ride: Ronald Mcdonald Mobile

Location: Sydney
NSW, Australia

dont get them, they are s**t. ive had them adn there isnt much difference in the tail/stop transition.
when you have the parkers on and you hit the brakes there is f**k all difference in the brightness.

 

_________________

Gooooone - Eb2 Coon - 143RWKW
Now - Mazda MX5 with HKS Supercharger 190RWKW
Crescent Motorsport Liverpool - 9600 6229

Top
 Profile  
 
 
Posted: Sat Feb 09, 2008 11:20 am 
Getting Side Ways
Offline
User avatar

Age: 41

Posts: 10829

Joined: 17th Apr 2005

Gallery: 34 images

Ride: BF MK11 XR 6 TURBO ZF 6spd

Power: 225 rwkw

Location: glenwood/sydney
NSW, Australia

ir your doing it to be visualy different... perhaps something like data mines led job on his "ol" e-series is the go??
Top
 Profile  
 
 
Posted: Sat Feb 09, 2008 1:38 pm 
Technical Contributor
Offline

Age: 57

Posts: 3227

Joined: 12th Feb 2007

Gallery: 10 images

Ride: Falcon

Power: 113 rwkw

Location: your mums
NSW, Australia

as regie said no good i have had a person i met off ebay tell me in daylight you can hardly see them.

they work well for trucks but if you have ever seen them , you can see whey they work so well, one if the size of the LED and the other is they are close to the casing,

with a car lens the led is a mile away.

 

_________________

BANNED

Top
 Profile  
 
 
Posted: Sat Feb 09, 2008 7:59 pm 
Technical Contributor
Offline
User avatar

Age: 37

Posts: 963

Joined: 8th Nov 2004

Gallery: 4 images

Ride: Liberty MY04 4GEN Luxury

Location: Melbourne
VIC, Australia

Thanks heaps for the feedback guys. I'll just keep it to normal globes :D

 

_________________

www.lukehimself.net

Top
 Profile  
 
 
Posted: Sat Feb 09, 2008 8:40 pm 
Technical Contributor
Offline
User avatar

Age: 60

Posts: 5659

Joined: 14th Jan 2005

Gallery: 10 images

Ride: 96 XH/97 EL

Location: South Coast
NSW, Australia

Have a search for tailights and the username mavs19 - IIRC he said to be careful of some of these units as the LED's were very one directional -very hard to see at various angles.
There is in the doco's a mod were you add a couple of diodes to make the park light come on with the brake light, and not vice versa.

 

_________________

96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl
97 EL Futura S/W: LPG, Alarm, LED int Lts, Trip Comp, F/Lane Dome Lt, Climate Ctrl, T5 Conversion

Top
 Profile  
 
 
Posted: Sun Feb 10, 2008 5:39 pm 
Fordmods Newbie
Offline

Posts: 1

Joined: 17th Aug 2006

Location: adelaide
SA, Australia

The viewing angle of an LED can be increased to nearly 160 deg, by filing down the top to make it flat.

We did this to IR leds when a remote control wouldnt work in certain parts of the room.. problem fixed.

The lower you can go, the wider the viewing angle.. until it stops working of course..

Also, about the brghtness.. you need high intensity LEDs, and the general concensous is 1/3 rear lights 2/3 brake lights. the 50/50 ones are crap.

Be careful of ebay ones, as some only use general d**k Smith style LEDs.. and in daylight you have no hope of seeing them.

Check the LUMENS value before purchase, make sure they match your existing lights, or higher
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 8 posts ] 

Who is online

Users browsing this forum: No registered users and 61 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Tue Nov 19, 2024 3:49 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names