Fordmods Logo

Lowering? 

 

Page 2 of 2 [ 24 posts ] Go to page Previous  1, 2

 
Posted: Tue Jun 14, 2005 6:21 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 740

Joined: 20th Nov 2004

Ride: BA Falcon

Location: Melbourne
VIC, Australia

chunkz wrote:
hmm i wonder what lowered with hubbies would be like :D
ewwww...
Top
 Profile  
 
 
Posted: Tue Jun 14, 2005 7:24 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 11105

Joined: 15th Nov 2004

Ride: No Fords current

Location: Hobart
TAS, Australia

Ryan0001 wrote:
chunkz wrote:
hmm i wonder what lowered with hubbies would be like :D
ewwww...


Looks better than stock highy and hubbies.
I'd go lowering before wheels.
Top
 Profile  
 
 
Posted: Tue Jun 14, 2005 7:55 pm 
Commercial Sponsor
Offline
User avatar

Age: 41

Posts: 141

Joined: 21st Apr 2005

Ride: KH 4x4 turbo tx3

Location: lismore
NSW, Australia

i used monroe gt shocks with superlow king springs and it cost me $
600

 

_________________

KF 4x4 turbo tx3...with very few stock parts!
Forged bottom end, oversize pistons, Autronic ECU, D2 coilovers.
22 p.s.i

www.playwithcarbon.com
For all your carbonfiber, fiberglass needs!

Top
 Profile  
 
 
Posted: Tue Jun 14, 2005 8:55 pm 
Stock as a Rock
Offline

Age: 37

Posts: 153

Joined: 28th Apr 2005

Gallery: 4 images

Ride: EA Falcon Hybrid

Location: geelong
VIC, Australia

hey dyl
ive just priced up some king springs for my ea, they were $120 from Oxfords motor spares, just off the torquay highway. thats $120 for the front and $120 for the rear
lows and superlows are the same price

we went to a tyre place and they said that superlows are illegal as they can fall out of place in the rear of the car so you'd have to get shorter shocks to suit

they also said that you may need a camber kit for the ea, dont know if it is needed in the ef

for what you said about the racv, 30mm lowered thats how far the lows will drop the car, so i think that lows are the way to go in your situation.

 

_________________

<<<DAN's CARS>>>
* 88 EA Falcon X2
* 81 FJ40
* 73 KE26 X2
* 73 KE20 x2
* 69 KE10 X2
and more

Top
 Profile  
 
 
Posted: Tue Jun 14, 2005 9:02 pm 
Commercial Sponsor
Offline
User avatar

Age: 41

Posts: 141

Joined: 21st Apr 2005

Ride: KH 4x4 turbo tx3

Location: lismore
NSW, Australia

yeh i got those supposed shorter shocks and they looked exactly the same as standard

 

_________________

KF 4x4 turbo tx3...with very few stock parts!
Forged bottom end, oversize pistons, Autronic ECU, D2 coilovers.
22 p.s.i

www.playwithcarbon.com
For all your carbonfiber, fiberglass needs!

Top
 Profile  
 
 
Posted: Wed Jun 15, 2005 3:10 pm 
Parts Gopher
Offline
User avatar

Age: 41

Posts: 82

Joined: 5th Nov 2004

Gallery: 5 images

Ride: ef fairmont ghia

Location: sunshine
VIC, Australia

i got all of mine done for $740 fitted.

You gotta go the superlows makes the car sit o much nicer
I got Monroe Gt Shocks
Camber kit is neccessary i had heaps of negative camber before it got adjusted
Wheel Allignment

you'll be disappointent if you don't go for superlows. Think of an xr do you want it that height cause that is around the same height with lows.
Top
 Profile  
 
 
Posted: Wed Jun 15, 2005 9:47 pm 
Fordmods Newbie
Offline

Posts: 2

Joined: 12th Dec 2004

Location: melbourne
SA, Australia

hey,
you have also forgot another option.... king spring ultra lows....
i have them in my ef xr with standard shocks. they look awsome.


with regards to shocks..... when i had all the standard springs out, i found that the front springs are almost identicle in size to the king springs..
so correct me if im wrong but i think you could get away with jsut buying a set of rear shockers and springs.

jsut a word of warning if you are going to buy a set of these... you cannot drive in almost any driveway, just last week i ripped!! yes ripped my front bar off. pulling out of a driveway that has NO slope on it. whoops. i have also found it to be difficult when getting your car serviced or getting new tyres put on... i couldnt get up any of the ramps in the workshops!

also camber kit YOU WILL NEED. you can expect tyres to go bald within 1000 kms of driving

other than that i think with these springs and standard wheels ( 16" xrs )
my car looks awsome.... if you want a pic jsut hollar :o) also if you want a set of standard xr springs equivelent to king lows throw me a message.
Top
 Profile  
 
 
Posted: Thu Jun 16, 2005 8:34 pm 
Smokin em up
Offline
User avatar

Age: 37

Posts: 229

Joined: 15th Apr 2005

Gallery: 10 images

Ride: 1996 EF Fairmont Ghia

Location: country
VIC, Australia

I hace the tickford suspension so i guess it would be the same as the xr's, as for the ultra lows i take it they are pretty damn low, i cant go to low as insurance so it annoyes me a bit, as much as i would love to just drop my car i am restricted. Thanks for all the feedback guys. Hopefully drop it in the future. :lol:

 

_________________

1996 EF Fairmont Ghia
- 2.5'' mandrel bent exhaust
- Au xr8 air intake snorkel
- Tinted windows
- Two way electric sunroof

Top
 Profile  
 
 
Posted: Mon Jun 27, 2005 4:46 pm 
Getting Side Ways
Offline
User avatar

Posts: 675

Joined: 19th Mar 2005

Gallery: 9 images

Location: Adelaide
SA, Australia

I rekcon Superlow all the way... :D otherwise you'll be dissapointed in the ride hight change. If your gonna lower it - lower the sh!t outta it!
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 2 of 2  [ 24 posts ]  Go to page Previous  1, 2

Who is online

Users browsing this forum: No registered users and 103 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sun Nov 17, 2024 3:33 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names