|
| SIXSEATER |
|
||
|
AU99 wrote: water due to humity has got in the clear to give it that white appearance... You could try and sand it off a little and see if its just sitting on the surface, You might be lucky and that might fix it but usually it gets in between coats of clear meaning the clear has to come off... you painted it around 4-5 pm didnt you??? thats correect, around 5ish mate. I sanded a small bit where the mirror sits and buffed and polished and that came out awesome so im hoping like u said it might be just sitting on top and with sanding it should be ok.. so did u say water got in the clear due to humdity causing the white appearance? thanks mate. |
||
| Top | |
||
| 95frd |
|
||
|
dont paint when its getting late in the day .unless your in a booth .
as the day cools it will (in easy terms)cool the paint causing it to have a flat look . sometimes you can sand then buff it up ,,if not sand then repaint. your doing great on this mate .. 
|
||
| Top | |
||
| SIXSEATER |
|
||
|
95frd wrote: dont paint when its getting late in the day .unless your in a booth . as the day cools it will (in easy terms)cool the paint causing it to have a flat look . sometimes you can sand then buff it up ,,if not sand then repaint. your doing great on this mate .. thats exactly what my paint looks like, flat look..... ill sand it first thing tommorrow and hopefully it after buffing it comes out with the goods. thanks for the feedback mate. I greatly appreciate it. cheers. |
||
| Top | |
||
| 95frd |
|
||
|
hope it just sands & buffs up good for ya ,it should though .
im glad your getting heaps of advice on here .way to go guys ..  dave .. |
||
| Top | |
||
| SIXSEATER |
|
||
|
Thanks Dave.
Yeah mate, if it wasnt for the forums i wouldnt be soo happy with my car today... thanks guys and yeah ill give it a try in the morning. cheers |
||
| Top | |
||
| AU99 |
|
|||
|
SIXSEATER wrote: so did u say water got in the clear due to humdity causing the white appearance? Thinners takes the moisture out of the air when you are spraying it... Landing it in your nice new paintjob  Booths being heated takes the moisture out of the air....
_________________ 2003 BA Falcon Egas Taxi Pack - XR Replica |
|||
| Top | |
|||
| SIXSEATER |
|
||
|
AU99 wrote: SIXSEATER wrote: so did u say water got in the clear due to humdity causing the white appearance? Thinners takes the moisture out of the air when you are spraying it... Landing it in your nice new paintjob Booths being heated takes the moisture out of the air.... ok, i understand now. thanks..... its nice knowing there is soo much knowledge available on the forums... thansk mate. |
||
| Top | |
||
| AU99 |
|
|||
|
Hey no probs...
There are a few guys here that have done a few home jobs in the past and you get better each time. You learn by your mistakes and each time it gets better.... If thats your first home job, you have done really well... Ive seen some really crap jobs done.....
_________________ 2003 BA Falcon Egas Taxi Pack - XR Replica |
|||
| Top | |
|||
| SIXSEATER |
|
||
|
Thanks Au..
Just finished two panels and i noticed while adding my coulour that it kinda went white just like last night (blushing). The only difference is that yesterday the paint started to blush while adding the clear not on colour. But, today the blushing started while adding the colour right through to clear so ill see how sanding goes in the morning...cant guarantee cause the blushing is pretty deep.. Anyhow the blushing that i encounted yesterday, (on clear coat only) i managed to sand that as it was on top layer and that came out good so hopefully the deep blushing encounted today comes up but i believe my chances are pretty slim.... Will update in the morning when i get a chance. cheers. |
||
| Top | |
||
| 95frd |
|
||
|
remember,,keep an eye on the air temp mate ,,too cold will cause it to dull.
even a few deg will do it .. ive had to push cars outside in the sunlight to get heat into it ,(helped clear it up) kutgw .. |
||
| Top | |
||
| SIXSEATER |
|
||
|
Hi guys,
I have nearly completed the front end and would like to share the outcome which i think looks sensational... Will have more pics once the car's comleted which shouldnt be too far away. Enjoy.     :dance
|
||
| Top | |
||
| TROYMAN |
|
||
|
looking good,,,, so what colour was it before???????
|
||
| Top | |
||
| 95frd |
|
||
|
for a home job ..you have done a awesome job on it mate ..
i bet your very pleased with youself .. dave .. |
||
| Top | |
||
| SIXSEATER |
|
||
|
95frd wrote: for a home job ..you have done a awesome job on it mate .. i bet your very pleased with youself .. dave .. Thanks mate. Im very happy and thats an understatement i think. lol Heres some more pics, inc s night shot.. bloody love this colour. lol  
Last edited by SIXSEATER on Sat Jan 15, 2011 10:14 pm, edited 1 time in total. |
||
| Top | |
||
| AU99 |
|
|||
|
You have done an awsome job... well done....
_________________ 2003 BA Falcon Egas Taxi Pack - XR Replica |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 19 guests |
