|
| Bullyz_XR6T |
|
||
|
Hey Guys,
Looking at painting my brake calipers on my xr6t can anyone put pics up who have painted theres for ideas!!! Cheers Bully |
||
| Top | |
||
| Papa Smurf |
|
||
|
I have done a set of Calipers for my AU (they are BA ones). I took them apart, just took the outriggers off, and then painted them Blue like the High Series ones on the BA/BF. I bought the paint from Supercheap and it cost me $17.50.
Here is a pic: Attachment: DSCF2397.JPG
|
||
| Top | |
||
| Kenay |
|
|||
|
why do you want to paint them?
|
|||
| Top | |
|||
| thepistonhead |
|
|||
|
Make sure you prep the surface properly!!
Metho, wax and grease remover etc. Very important.
_________________
|
|||
| Top | |
|||
| Papa Smurf |
|
||
|
Kenay wrote: why do you want to paint them? Why not? it may be bling but isn't that what most of the mods people do are? 
|
||
| Top | |
||
| Bullyz_XR6T |
|
||
|
thanks guys im looking at using Duplicolor Metal Cast Anodised Blue from supercheap anyone used it??
|
||
| Top | |
||
| 12slot |
|
|||
|
Bullyz_XR6T wrote: thanks guys im looking at using Duplicolor Metal Cast Anodised Blue from supercheap anyone used it?? pretty sure that has to be painted over a chrome surface for it to work.. maybe if you polished the calipers first... not worth it unless your building a show car imho
_________________ Ea Monty: 12 slotters/t5/ef thermos/stezza/2.5" redback catback/climate control conv/white venetian/ Old School Baby |
|||
| Top | |
|||
| Bullyz_XR6T |
|
||
|
yeah u can buy a duplicolor base/ground coat apparently which works well with it! apparently you can do you rocker cover in it aswell is that true
|
||
| Top | |
||
| Campbell18 |
|
|||
|
yeh i painted my rocker cover with that stuff not that long ago, comes up really nice with the base coat
_________________ ED 4.0L auto... pacemaker PH4480, Aus Pac Catback exhaust, wade 1636 with j3 tune =130rwkw |
|||
| Top | |
|||
| facer01 |
|
||
Age: 31 Posts: 284 Joined: 27th Sep 2009 Ride: 1995 EF Ford Fairmont Location: Bundaberg, QLD |
F you use the anodized paint make sure you use the base coat though or it'll look like utter s**t
have painted my rocker cover with it came up pretty good the anodized part is very thin though |
||
| Top | |
||
| OZBMX |
|
|||
|
thepistonhead wrote: Make sure you prep the surface properly!! Metho, wax and grease remover etc. Very important. and even more importantly, do not get brake fluid on them when bleeding them, nastiest stuff around.
_________________ Signature removed by moderator.signature must not exceed 120x500 pixles |
|||
| Top | |
|||
| StrawbZ |
|
|||
|
or you could do it this way
all you need is: Masking Tape Plastic Bags Wax and grease remover Preferred Caliper paint colour Couple of rags some sand paper Take your wheel off , wash the caliper and then use to wax and grease remover to get rid of any left overs, give it a light sand and use the wax and grease remover again, wipe it dry, use the masking tape and plastic bags to cover your brake disc and any other parts you do not wish to get sprayed. Make sure its dry and all wax and grease is off then spray away with your paint, leaving about 10minutes in between coats, give it about 3 - 4 coats, let it dry, then move on the next caliper Quite easy man |
|||
| Top | |
|||
| fordfreak ef |
|
|||
|
Polish them!
|
|||
| Top | |
|||
| peaandham |
|
|||
|
Get them HPC Coated, cooler brakes and it will look pimp as !
polishing them should attract to much heat ! but still would like nice !
_________________ OLD CAR: EB II Falcon, Everglade Green, 250thous (Rough Guess), Wildcat Extractors, 2.5 Exhaust with Muffler + Hot Dog, 18 Inch Rodney Jane Mags, XH Snorkel, EA MPEFI Tubing ! |
|||
| Top | |
|||
| OZBMX |
|
|||
|
Kenay wrote: why do you want to paint them? because it looks s**t on bricks. otherwise. 
_________________ Signature removed by moderator.signature must not exceed 120x500 pixles |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 81 guests |
